|
|  |
11 Oct 2005
ICT E1-10/100BT is a high performance remote Ethernet bridge with self-learning ability connecting two Ethernet segments over E1 links. ICT E1-10/100BT also functions as a high speed, Ethernet interface, synchronous short-range modem operating at full duplex over unconditioned lines. Its compact size and low cost make it ideal for cost-sensitive bridging applications or as LAN extenders.
FEATURES:
? Transparent transport of LAN traffic over unframed E1 circuits
? Full compliance with IEEE 802.3 and Ethernet V.2 View full descriptionTags Network Converters Fiber Modems
Company: Techpac Company Limited
Web address: http://www.tech-pac.com
Address: 6/F., Houston Centre, 63 Mody Road, TST, Kowloon,, Hong Kong, Hong Kong
Phone: 852-2-5710327 - Fax: 852-2-5710317
|
ICT E1-10/100BT is a high performance remote Ethernet bridge with self-learning ability connecting two Ethernet segments over E1 links. ICT E1-10/100BT also functions as a high speed, Ethernet interface, synchronous short-range modem operating at full duplex over unconditioned lines. Its compact size and low cost make it ideal for cost-sensitive bridging applications or as LAN extenders.
FEATURES:
? Transparent transport of LAN traffic over unframed E1 circuits
? Full compliance with IEEE 802.3 and Ethernet V.2
? Manual/autosensing 10/100 BaseT LAN, half or full duplex
? LAN cable straight/cross-over auto sensing (AUTO MDI/MDIX)
? Built-in dynamic MAC address LAN table (1,024 MAC address)
? Transport super long frame length of 1528 bytes (without CRC)
? VLAN support
? Monitoring of remote unit status from local unit.
? Manual reset of remote unit from local unit
? Auto-reset function: disable or enable (activates when no network traffic signal last for 12 seconds)
? Automatic filtering/learning/aging of MAC address LAN table
? 30,000 frames per second filtering and forwarding rate
? Clocking: internal, network,
? Support remote loopback
? Compact in size and lightweight, only 0.4kg
? E1: 75ohm unbalanced or 120ohm field selectable
? 220VAC or -48VDC power supply
SPECIFICATIONS
Line Interface
Standard ITU-T G.703
Line Code HDB3 (2048 kbps baud rate)
Framing Unframed
Timing Internal, Receive(Network)
Speed 2.048M bps
Receive voltage 0~-43 dB
Transmit high voltage 2.37V?10%,75ohm
Transmit low voltage 0 ?0.1V
Connector BNC coax: 75ohm for 2048 kbps unbalanced
RJ-45 Connector: 120ohm for 2048 kbps balanced
Ethernet interface
Standard IEEE 802.3
Speed 10M/100Mbps auto sensing
Operation Mode Full duplex/Half duplex/Adaptable
MAC: 32K byte
Connector RJ-45
Physical
Height 36 mm/1.4 in
Width 200 mm/7.7 in
Depth 146 mm/5.7 in
Weight 0.4kg / 0.88lb
Power Supply
AC Source 220 VAC (?10%), 50 to 60 Hz, 3 VA
DC Source -48 VDC (-36 to -72 VDC), 3W
Power Consumption 3W
Environment
Operation temperature 0 -50 C
Storage temperature -20~70 C
Humidity Up to 95%, non-condensing |  |
|
|
Selling Leads [Archives]