Technical Data:
Diameter:80---500mm
Length:100---4000mm
Material Thickness:0.06---0.15mm(Aluminum foil strip)
Raw material width:60mm
Compression ratio :1:3.5( means make the 3.5m tube to 1m)
Surface corrugation:7 corrugation
Lock way:Double-decked tabby locking
Feeding speed:0---46m/min... View full description
Technical Data:
Diameter:80---500mm
Length:100---4000mm
Material Thickness:0.06---0.15mm(Aluminum foil strip)
Raw material width:60mm
Compression ratio :1:3.5( means make the 3.5m tube to 1m)
Surface corrugation:7 corrugation
Lock way:Double-decked tabby locking
Feeding speed:0---46m/min
Electricity control:PLC
Refrigeration system:Emulsified liquid cooling
Electrical power:380V,3PH,50Hz
Main motor power:1.5kw
Power of Pump:0.04kw
Power of cutting:0.12kw
Diameter of raw material coil:min=70mm( inside), max=500mm(outside)
Weight of raw material coil:50Kg
Mainframe dimension:2210×830×1530mm (L×W×H)
Weight of Mainframe:440kg
run-out table diamesion:2300×1200×650mm (L×W×H)
Weight of run-out table:50kg
Complete machine collocate: Mainframe +run-out table
Collocate upgrade:
Above equipment for equipment conventional arrangement, if the customer has the special request, our company may correspondingly make the improvement on the equipment, meets the customer need as far as possible! Below I enumerate a common modification:
Raw material width can change it to 45mm, 50mm, 55mm and so on. Every time adds one kind of width corresponding increase little equipment cost
The compression ratio may increase to 1:4.5, corresponding equipment cost little increase.This equipment may improve the manufacture pipeline type for the superficial four ripple, four cross grain locking way (expansion and contraction compared to more reasonable, locking is more reliable artistically)
If customer need the both sides to shrink the mouth, may provide shrinks the mouth machine, equipment cost little increase
If customer need compress the original product(aluminum tube),we can offer machine for compressing, equipment cost little increase
See More Item(s) from This Company
Foot Power Shear The Foot power shearer is of simple construction with a sideway adjustable and reliable control with trap-pull spring inside point fixed method. Some machine tools have a press sheet unit to make it...
Motor Driver Shear The machine is of all-steel welded construction. Simple construction is with good appearance. It is easy to operate, with low energy consumption. It is widely used for medium and thick steel sheet...
Hand Folder Main Technology Date:
Hand Folder SBS-2.5×1220 SBS-2×1550 SBS-2×2000 SBS-1.5×2500 SBS-1.2×3200 SBS-1.2×4000
Process...
Flange cutting machine Main Technology Date
Model Angle Thickness
(mm)
Dimension
(mm)
(L*W*H) Weight
(kg)
TDF12 1.5x1300 60 1.5 1800*1100*780 380
TDF12 1.2x1500 60 1.2 2100*1100*780 430
TDF12...
TDF Flange Forming Machine TDF Flange Forming Machine
Main Technology Date:
Model Motor
( kw) Thickness( mm) Shape Height of Flange Weight
( kg) Dimension
( mm)
SBTDF-12 2.2kw 0.5-1.2
...
Automatic Line3 Line 3 consists of a feeding metal frame, leveler grooving roller, hydraulic notch and punch square machine, hydraulic shearer and folder. The electrical control system uses a computer with a...
SBHT-3100 Flat-Oval Ducts Machine Main Technology Date
Maximum Sheet Thickness 1.25 mm
Maximum Duct Length 3000 mm
Basic Circular Duct Diameter 330 mm - 2000 mm
Flat Oval Sizes 150 x 435 mm - 915 x 2650 mm
Power...
SBTF-1602 Spiral Tube former Main Technical Specification:
Diameter range 80 -1600mm
Thickness of strip 0.4 -1.3mm Glvanized steel
0.8mm Sinless steel
0.4-1.2mm Auminum
Strip Width standard 137mm up to 1mm
thickness,...
SBTF-1500 Spiral Tube former Main technical data:
Diameter range 80-1500mm
Tube Length 120-8000mm
Thickness of Strip 0.4-1.2mm
Width of Strip 137-140mm
Strip Speed 1-38/min
Dimension (L x W x...
View full description
Detailed Selling Lead Description
