N1200 is an advanced self-adaptive PID controller with an algorithm that constantly monitors the process performance and adjusts PID settings in order to always obtain the best possible control response.
A single model is able to accept most industrial sensors and signals and provides all output types required to control different processes.
All controller configuration can be achieved from the front panel without performing any hardware change.
The multi-purpose inputs and outputs can be combined to provide tremendous versatility... View full description
Address: 2315 NW 107TH AVE., DORAL, FL, United States
Phone: 1-786-2352674
Detailed Selling Lead Description
N1200 is an advanced self-adaptive PID controller with an algorithm that constantly monitors the process performance and adjusts PID settings in order to always obtain the best possible control response.
A single model is able to accept most industrial sensors and signals and provides all output types required to control different processes.
All controller configuration can be achieved from the front panel without performing any hardware change.
The multi-purpose inputs and outputs can be combined to provide tremendous versatility with extremely high accuracy in the most demanding applications.
FEATURES
Self-adaptive PID control.
Multi-sensor universal input without any change in hardware or recalibration.
Square root calculation for linear inputs .
Outputs: solid state relay pulse, 4-20 mA and 2 SPST relays, 1 SPDT relay (optional).
Auto-tuning PID parameters .
Outputs functions can be configured as control, alarm, and PV and SP retransmission.
Up to 4 timed alarms from 0 to 9999 seconds.
Alarm functions: minimum, maximum, differential, differential minimum, differential maximum, open sensor, event and disabled.
Digital input with the following functions:
- Automatic/Manual control selection;
- Enable/disable outputs;
- Remote setpoint selection;
- Select program 1;
- Ramp and soak program hold.
PV or setpoint retransmission in 0-20 / 4-20 mA.
Automatic/Manual bumpless transfer.
Heater break alarm (optional).
Detects any sensor break condition.
Remote setpoint input: 0-20 mA, 4-20 mA, 0-5 Vdc, 0-10 Vdc.
Programmable soft-start (0 to 9999 seconds).
Ramp and soak: 20 programs of 9 segments and possibility to link programs, thus resulting in one program of up to 180 segments.
Optional serial RS-485 serial communication, Modbus RTU slave protocol, up to115.2 kbps.
Supports network of up to 247 slave controllers.
Context driven menu adjustable to optional features.
Indelible 8-digit serial number can be viewed from the display.
Password protected parameters.
The circuit can be removed without disconnecting wires.
NEMA 4 (IP 65) front bezel with silicone keypad.
SPECIFICATIONS:
Accepts thermocouples J, K, N, R, T, S, B, E, Pt100 RTD, 0-20 mA, 4-20 mA, 50 mV, 0-5 Vdc and 0-10 Vdc.
Internal resolution: 32,767 levels (15 bits).
Displayed resolution: 12,000 levels.
Dual LED display: red upper display for PV, 10 mm high; green lower display for SV, 8 mm high.
Sampling: up to 55 measurements/second.
Control output update: up to 20 ms.
Isolated 4-20 mA output with up to 32,000 resolution levels
(15 bits), 550 ohms maximum load .
2 SPST relays 1,5 A / 240 Vac/dc and 1 SPDT relay (optional)
3 A/250 Vac/dc.
Power supply: 100 to 240 Vac/dc, 50/60 Hz; optional 24 Vac/dc.
Maximum consumption: 9 VA.
Operating environment: 5 to 50 °C, 30 to 80% RH.
Protection: NEMA 4 front bezel (IP65), PC UL94 V-2,
Rated CE and UL.
Dimensions: 48 x 48 x 110 mm.
Manufactured by: novusautomation.com
See More Item(s) from This Company
Loop Powered Process Isolator PRESENTATION:
Loop isolators provide signal protection by electrically isolating the input signal from the output.
NOVUS TxIsoLoop-1 and TxIsoLoop-2 simplify your application and avoid the...
View full description
Detailed Selling Lead Description
