The programmer design simple, and operate easily through OBD directly and no need to press any button. Support all Toyota 4D chips, with the original key programming protocol, non-general initialization protocol.
Safe and highly effective: Only about 10 second to program a new key; the anti-thelf system will not be damaged in safe using way, it is the most quickly and safest programmer.
The operating step as follows: ( read the using step and the importance notice carefully)
Web address: http://www.cnreliable.com Address: Floor 25, LanSeHaiYunJu Building, NO.9 Shixia North 1st St., Futian District, Shenzhen, Guangdong, China
Phone: 86-755-82844176 - Fax: 86-755-82981320
Detailed Selling Lead Description
The programmer design simple, and operate easily through OBD directly and no need to press any button. Support all Toyota 4D chips, with the original key programming protocol, non-general initialization protocol.
Safe and highly effective: Only about 10 second to program a new key; the anti-thelf system will not be damaged in safe using way, it is the most quickly and safest programmer.
The operating step as follows: ( read the using step and the importance notice carefully)
1. Turn the ignition on with the right 4D chip key.
2. Connect the programmer to the OBD port of the car, there are some short beep sounds after power on. When the connection with the Computer of car is done successfully, there is a long beep sound in 3 seconds, and the "LED?is on, as well as the anti-light "SEC? which means the car is in the "key programming state?
3. Take away the programmer from OBD.
4. Matches 2 pcs main key and 1 pc vice-key to the IMMO computer
Notice: 2 new main key and 1 vice-key are needed to close the programming procedure?
a) Close all the car door.
b) Insert the first new main key to the ignition for 5 seconds.
c) Insert the other main key to the ignition for 5 seconds.
d) Insert the vice-key to the ignition for 5 seconds.
e) The new ignition key will be confirmed by the new IMMO.
Only program 1 or 3 main keys to the IMMO computer( Manual close the mode after complete the programming)
a) Close all the car doors.
b) Insert the new key for 5 seconds.
c) Insert another new key for 5 seconds.
d) Take out the key from ignition
e) Insert the first programmed main key, and turn on the ignition for 5 times quickly, then take it out.
f) The new ignition key will be confirmed by IMMO
Notice:
1. Must use the right Toyota 4D chip, otherwise you take the consequences.
2. Don't try to open the cover of programmer and dash board
3. This machine is only provided for the legal auto repair.
See More Item(s) from This Company
Ford vcm ids Integrated Diagnostic System(IDS)
for:Ford Mazda LandRover Jaguar
The Vehicle Communication Module (VCM) is a high performance, ruggedized, vehicle serial communications gateway. This device...
OPEL Tech2 Net Weight: 0.23KG
Features:
RS232 Interface for the 3rd party Opel TECH2 Software with K-Line Multiplexer which does not require
switching of diagnostic pins.
Package Contains:
RS232...
Toyota KEY Programmer L7 This device can be used to read the pin-code of key automatically, and write the pin-code into the computer transponder of the suited ecu. It can be used to match the vehicle when all keys are lost...
BMW KEY PROGRAMMMER S7 BMW key programming device and software for vehicles equiped with EWS module , coverage 1994-2004 that have EWS module(including EWS2, EWS3 and EWS4, Rover75, MINI, RangeRover, FreeLander,...
Benz Key Programmer Net Weight: 1KG
Program the key for Mercedes A-klasa,E210 ,ML320,W140,Gelenvagen with PCF7935 chip.
BMW key Maker:AK-200 Genuinely and wholly supporting keys programming of all BMW from 1995-2007 year.
Support Type:
1 series: E87
3 series: E36/E46/E83/E90/E91/E92
5 series: E34/E39/E53/E60/E61
6 series: ...
T-Code 5.8 T300 Net Weight: 3.5KG
Functions
Use for key programming. More cars than any other transponder machine .
Workable Models
ACURA AUDI ALFA CHEVROLET CITROEN CHRYSLER/DODGE/JEEP DAEWOO FORD FORD...
TOYOTA Smart Key maker Description
Using the smart key
(1) Add the other keys into the main key
1.Insert the key programmer to the car diagnostic interface OBD, and the instrument will enter into the...
BMW CAS3 PROGRAMMER Net Weight: 1KG
Functions:
Mileage correction for BMW CAS / MB EZS / DASHBOARDS / MODULES / with 912 / 9s12 / 9s12x MCU, in circuit programming ( no need removing mcu ), can read / edit /...
View full description
Detailed Selling Lead Description
