Molten slat furnace - 04 Jul 2009

Series of molten salt furnace is a kind of Direct Circulation-style special industrial furnace, use oil and gas as the fuel ,molten salt as the carrier, forced liquid circulation by cylcle pump, transfer heat to the users of thermal equipment,then return to re-heating.when the temperature up to 350-480 state,the organic category set can not be used again,need to use molten satlt heat-type set.The entire system composed by the furnace,circulating pump and a melting system.

Advantages:
1). Combustion stability;
2). Provide higher temperature at a lower pressure,;
3). heating temperature stability,can be adjusted accurately and the highest thermal efficiency.
4). Perfect running control and complete securiy detection device.Combustion temperature are automatically adjusted, automatic protection,to ensure safe operation.
5). Closed circulation heating,no heat emission,highly efficient heat utilization.
6) To save energy using of low-cost.

Heater type:Vertical or horizontal,coil-fired or oil fired ,will produce according to customers individual real conditions
rated heat power: 120-14000KW
pressure designed:1.0-1.1 Mpa
heat efficiency:min68% (non-including waste heat recovery)
highest working temperature: 450
circulation molten salt volume: 80-550 m3/h
system installed capacity: 80-400 KW
combustion type; coal ,oil
equipment weight: 7000-220,000kgs