FOC OPV35 is a high speed, synchronous fiber optic modem converting V.35 electrical signal into optical signal for transmission over fiver optic cable. It has selectable data rates from 64K up to 2.048Mbps (E1), and a range up to 30KM
FEATURES:
l Extends the range of E1 services over fiber optic up to 30 KM.
l Complies with all relevant ITU-T standards
l Support of framed and unframed E1 signals. Transparent to E1 framing
l Comprehensive diagnostic functions: built-in BERT, V.54 diagnostics, CRCView full description
Web address: http://www.tech-pac.com Address: 6/F., Houston Centre, 63 Mody Road, TST, Kowloon,, Hong Kong, Hong Kong
Phone: 852-2-5710327 - Fax: 852-2-5710317
Detailed Product Description
FOC OPV35 is a high speed, synchronous fiber optic modem converting V.35 electrical signal into optical signal for transmission over fiver optic cable. It has selectable data rates from 64K up to 2.048Mbps (E1), and a range up to 30KM
FEATURES:
l Extends the range of E1 services over fiber optic up to 30 KM.
l Complies with all relevant ITU-T standards
l Support of framed and unframed E1 signals. Transparent to E1 framing
l Comprehensive diagnostic functions: built-in BERT, V.54 diagnostics, CRC
l Loopback diagnostics: local (LLOOP), remote (RLOOP) and local remote (RRLOOP)
l Status LEDs
l Can work opposite with TC-OPE1
l Clocking: internal, external, network
l Low power consumption: 2W
l 220VAC or -48VDC power supply
SPECIFICATIONS:
E1 Interface
l Baud rate: Nx64Kbps (N= 1~32)
l Mode: DTE, DCE selectable
l Connector: DB25 (female)
Fiber Optic Link
l Baud rate: 2.048Mbps ?50ppm
l Fiber Optic: single mode, 1310nm
l Connector: FC (SC, ST available on request)
Physical Specifications
l Operating Environment:
? Temperature: 5-500C
? Humidity: 5% - 95%, non-condensing
l Dimensions: 210 x 140 x 38 (mm)
See More Item(s) from This Company
ICT 4E1/10BT
ICT 4E1-10/100BT is an inverse multiplexer transmitting one Ethernet channel over multiple E1 links, bundling up to 4E1 (max.7.68Mbps full-duplex). It allows bridge and routers to operate at their...
ICT FE1-V35/10BT
ICT FE1-V35/10BT converter gives the interface conversion between G.703 E1 (framed and unframed) and V.35/10Base-T. When used as an interface converter or digital access solution for unframed E1 and...
PMX OPMUX-16E1
PMX OPMUX-16E1 PDH multiplexer combines 16 E1 links over a fiber optic link. A pair of OPMUX-16E1 offers simple and low-cost connectivity for 16 E1 channels t distance up to 50KM. OPMUX-16E1 has...
ICT E1-10/100BT
ICT E1-10/100BT is a high performance remote Ethernet bridge with self-learning ability connecting two Ethernet segments over E1 links. ICT E1-10/100BT also functions as a high speed, Ethernet...
XMD DSL02
.The XMD DSL02 is a 2-wire high speed DSL modem based on the ITU-T G.991 recommendation of G.shdsl standard, capable of symmetric data (128Kbps ~ 2304Kbps) transmission up to 5KM over 2-wire copper...
PMX OPMUX-FL100
PMX OPMUX-FL100 PDH multiplexer combines four/eight E1 channels and one 10/100M LAN channel over a single fiber optic link. A pair of PMX OPMUX-FL100 offers simple and low-cost connectivity for these...
ICT FE1/V.35
The ICT FE1/V.35 provides an effective way to establish a permanent data link over a G.703/G.704 line. It performs the conversion between V.35 (N?64Kbps (N
View full description
Detailed Product Description
