Brief introduction:
Liside CU is an efficient cyclic phosphonate flame retardant for the treatment of
textile products. It is non-corrosive with high phosphorus content, excellent water
solubility on a wide range of fabric type. It mainly used in furnishing, curtaining,
building, special workwear and automotive applications. It is particularly
suitable for the treatment of polyester fabric, T/C blends and PU coating to impart
a finish that is durable to washing and dry-cleaning.
Web address: http://www.liside.com Address: North suburb of Jiangyan City, Taizhou, Jiangsu, China
Phone: 86-0-13801421425 - Fax: 86-0523-8668955
Detailed Product Description
Brief introduction:
Liside CU is an efficient cyclic phosphonate flame retardant for the treatment of
textile products. It is non-corrosive with high phosphorus content, excellent water
solubility on a wide range of fabric type. It mainly used in furnishing, curtaining,
building, special workwear and automotive applications. It is particularly
suitable for the treatment of polyester fabric, T/C blends and PU coating to impart
a finish that is durable to washing and dry-cleaning.
Specifications:
1) Appearance: clear highly viscous liquid
2) Color number: 100 max.
3) Phosphorus (Wt%): 20.5% min.
4) Acid Number (mg, KOH/g): 15 max.
5) Density (g/cc at 25deg;C): 1.21.3
6) Viscosity at 20°C (Cps): 150,000 max.
7) Flash point: 165°C
8) DMMP assay (Wt%): 0.5% max.
9) TMPP assay (Wt%): 0.5% max.
10) Durable to washing times: 50 times min.
Properties:
1) High heat stability and good retain of hand feel and drape after
processing
2) Low volatility and good compatibility to major polymer
3) Little discoloration after treatment
4) High durability to washing and good retain of color brightness
5) Non-toxicity and high safety
Typical application process:
1) Treatment of polyester fabric and T/C blends
a) Recommendatory formulation:
i) Flame retardant: 6 - 15kg
ii) Added water, 20kg: stirred evenly
iii) Added 20% conc. Na2HPO4
or Na2CO3: 4 - 8kg pH is buffered to
5.5 - 6.5 or 25% conc. aqua ammonia
iv) Added penetrating agent: 0.05 - 0.2kg mixed evenly
v) Additional water: diluted by water to 100kg
b) Procedure:
i) Fabric for treatment with flame retardant should be clean and
absorbent. Starch and other sizes should be removed before
processing
ii) Fabric shall be treated by padding, dipping according to fabric
composition, weight and construction
iii) 120 - 140°C x 60sec, pre-drying
iv) High temperature thermo-fixation process
v) Cooling, rolling up the treated fabric. To improve the hand feel,
fabric can be cleaned again if necessary to remove the un-affixed
flame retardant on the fabric
2) Coating treatment of polyester fabric and PU fabric
a) The formulation is dried and cured in a single pass at 150°C for 120
seconds
b) The formulation is buffered to pH 5 using sodium carbonate. The
added amount of soda ash is about 0.4%
Attention:
The information of our products is for reference only. We are not responsible for
any unexpected results or patent dispute caused by it.
See More Item(s) from This Company
Fluorescent Whitening Agent OB
Technical data:
1) Appearance: powder in blue and white
2) Shade: blue and white (similar with reference sample)
3) Purity: >99%
4) Melting point: 198 - 200°C
5) Fineness: more than 100...
Fluorescent Whitening Agent KSN
Performance and characteristics
1) Strong fluorescent effect, small amount required, but excellent
whitening effect
2) Wide application in whitening polyester fibers and various plastics...
Fluorescent Whitening Agent OB-1
Performance and characteristics:
1) Strong whitening effect and strong fluorescent effect
2) Wide application in whitening polyester, nylon fibers and various
plastics
3) Excellent high...
Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether
Features:
1) LISIDE resins are binders resistant to hydrolysis
2) They can be used for anti-corrosion coatings, for coating on galvanized
steel, other non-ferrous metals, concrete, fiber...
Flame Retardant Agent (FR-CP)
Main chemical composition: organic phosphonate, reactive with fiber
Specifications:
1) Appearance: colorless or slightly yellow, highly viscous liquid
2) Solubility: miscible
3) pH (3%...
Flame Retardant for Plastic Mca
Formula: C6H9N9O3
Molecular Weight: 255.2
CAS NO.: 37640-57-6
Physical appearance: fine, white, crystalline powder, nontoxic, odorless; in dissolvable
in water and most organic...
Odors And Flavors Adsorbent
Features:
LISIDE-500 is a highly active adsorbent material for the removal of undesirable
odors and flavors from polymers. This special adsorbent system can easily be incorporated as an additive to...
View full description
Detailed Product Description
