Web address: http://www.testcenter.com.tr Address: Eminel sanayi sitesi 666 sokak no 16, Ankara, Ostim, Turkey
Phone: +90-312-3959673 - Fax: +90-312-3959674
See More Item(s) from This Company
Consalidation
Ø Rigidly manufactured from aluminium alloy casting to provide a high degree of accuracy with any frame distorsion under load. The load bridge group is supported in high accuracy self-aligning seat...
Constant head permeameter
Used to determine the permeability of granular, gravel and sand soils. The specimen is formed in an acrylic permeability cell, and water is passed through it from a constant level tank.
The...
Sand density cone apparatus
Ø Used to determine the in-situ density of fine graned compacted soil.
The apparatus consists of a steel double metal cone with valve, plastic 5 litre jars, metal base with centre hole.
Ø Weight:...
Plate bearin test equipment
*Hydraulic Jack 500 kN capacity, complete with hand pump
*Pressure gauge dia. 200 mm, range 0-500 kN, div. 2 kN
*Carrying cases.
*Weight: 110 Kg...
Cbr testing machine
Ø Ruggedly constructed with frame to encompass the strain and loads, easy to use, it is designed to operate with the minimum of maintenance. Platen rate is 1.27-1 mm/minute also maintained under load...
Proctor/cbr compactor
Ø Preset blow pattern ensures even compaction. Solid state controls for reliability and maintenance. Automatic digital counter which re-sets to zero on completion of test.
Ø Adjustable rammer...
Liquid limit casagrande
Ø With ebonite base and removable brass cup.
Ø The height of drop of the cup may be adjusted via the hand crank mechanism.
Ø A built-in blow counter is supplied as standard.
Ø Grooving tool...
Universal testing machine
Ø The frame is designed to carry out tensile tests using the grips placed in the clamping heads. In the upper part, between the head and traverse, it is possible to carry out flexion, compression,...
Kleine test apparatus
Ø Used for the determination of the carbon dioxide in lime
Ø Consisting essentially of a decomposition flask 50 ml cap., of an absorption vessel to contain the potassium hydroxide solution, a...
Compression and flexural testing machine
Ø it performs a fully automatic test procedure, including speed rate and software for Certificate printing. Upper and lower compression platens dia. 165 mm. The vertical daylight
Ø The...
Jolting apparatus
Ø Used to compact cement mortar prisms 40x40x160 mm in the three gang mould, as requested by the above Specifications. The apparatus, consists of a table holding the mould, seated on a rotating cam...
Flow table
Ø Used for determining the fl ow of mortar and building lime. To perform this test, a specimen contained in a cone mould is placed on a metal surface which is then raised and dropped from a...
Lever support
Ø LEVER SUPPORT (drill-holder type)
Ø complete with washer and penetration rod brass made, clamp and locking support
Ø Used for the determination of stiffening time on products and systems...
Plunger penetration apparatus
Ø Used to determine the consistency of
fresh mortar, lime and masonry cement.
This apparatus consists in a base, a vertical support, a graduated rod with 25 mm dia. plunger, a test cup 80 mm dia....
Le chatelier water bath
Ø In stainless steel, it contains up to 12 moulds which are maintained at a height of approx. 50 mm above water level. A device located beneath the lid prevents condensation from falling onto...
Lenght comparator
Ø Precision apparatus used for measuring length changes. Consists of steel base with levelling feet, chrome
plated columns with support for 0.001 dial gauge , as required by Standards, and two...
Three gang prism mould
MODEL BOYUT AGIRLIK
E100 40X40X160 9
E102 40,1X40X160 9
E103 40,1X40X160 9
E104 40,1X40X160 12
E110 50X50X50 12
E111...
Automatic vikat
Ø . Cartesian Robot Controls Penetration Device Movements along X Y Z axes
Ø Up to 30 different test types may be programmed and over 1000 tests may be memorized. PC Port
Ø Initial and fi...
Vikat apparatus
Ø . Used to determine the amount of water required to produce a cement paste of standard consistency and the setting time. The frame is supplied complete with a 300 g consistency plunger (dia. 10...
Flow cone
*Used for viscosity and fluidity determinations of mortars, muds, grouts, fluid materials, etc.
*Mortar fluidity is considered suitable when the flow time of 1000 cc of mortar is comprised between...
Bulk density of lime
Ø Consists of a 1 litre capacity cylindrical container, fi lling ring with opening and hopper with spring-loaded trap.
Ø Dimensions: 150 x 150 x 400 mm.
Ø Weight: 5.5...
Air content meter
* Designed to deter mine the air content in cement mortar, cement paste and lime mor tar. Made from cast aluminium, the test pot one litre capacity and the upper par t are air-tight sealed by means...
Blaine air permeability apparatus
* Used to determine the fineness of Portland cement in terms of the specific surface expressed as total surface area in square centimeters per gram of cement. The apparatus is supplied with glass...
Concrete test hammer
*N Type
*Strength range: 10-120 N/mm2
*LCD Display
*It consists of a key controlled test hammer with a digital expansion which enables date and hour of test session to be input (as well as...
Pull off
*This dynamometer provides you with information on both the adhesive force and the tensile strength of two layers of materials: lime, facing plasters, mortars, building plasters, cements, concrete...
Universal core drilling machine
Ø Coring angle :360°
Ø Elektric motor at three speeds: 670, 1140, 1590 rpm.
Ø All working and moving parts are cadmium plated for rust protection.
Ø The drilling excursion is 550 mm and...
Water impermeability tester
Ø Apparatus at 3 points to determine the depth of penetration of the water into the concrete impermeability under known time and pressure
Ø The unit accepts up to 3 concrete cubic, cylindrical...
Vebe cosistometer
Ø Vibration time can be adjustable
Ø Complete set including :
Vibration table
Cylindirical Container
Slump cone, galvanized steel
Graduated rod
Cone funnel, Fiber Base...
Slump cone test
Ø Slump cone, galvanized steel
Ø Tamping rod, galvanized dia 16x600
Ø Cone funnel, galvinized steel
Ø Base plate
Ø Steel rule 300mm long
Scoop,...
J ring apparatus
J-RING, galvanized steel, rectangular section 30 x 25 mm and median diameter of 300 mm, rings bars dia. 10 x 100 mm, The bars have distance of 48 mm
Ø CONE MOULD, galvanized steel
...
L shape box
Ø L-BOX, stainless steel made, consisting of:
Ø container with inside rigid surfaces
- obstacle formed by 3 vertical bars
Ø having 16 mm dia.with free light of 38 mm
- gate in guillotine...
V funnel
Ø V-FUNNEL, stainless steel made, having 10 litres capacity, stand mounted
Ø Rectangular bar, 900 mm long
Box, polythene made
http://www.testcenter.com.tr/beton/v_hunisi.htm
Pan type mixer
Ø it can be moved by rubber wheel
Ø The Mixing pan is removable and tils"135 °" for mixing operation.
Ø Gearbox is designed as parellel to floor, in this way the motor is protected from...
Pipe testing machine
Ø Control Unit : Dijital and/or Computer, Full Automatic
Ø Load Measure Flexure: 200 Bar PressureTransducer
Ø Oil Flow Control : 24 V Selenoid Valve
Ø Max vertical daylight : 2000 mm...
Flexural testing machine
Ø Control unit:Digital or computer full automatic.
Ø Speed rate control:Motor speed control unit
Ø Load masure:200 bar pressure transdiser.
Ø Oil flow control:24 vold selonoid...
Compression testing machine
Ø Control unit:Digital or computer full automatic.
Ø Speed rate control:Motor speed control unit
Ø Load masure:450 bar pressure transdiser.
Ø Oil flow control:24 vold selonoid...
Benkelman beam
Alluminium alloy made, complete with dial indicator and accessories, it is utilized to measure the deflection of the road surface
when loaded by the wheels of vehicles. The beam is put in contact...
Saybolt viscometer
Ø Used to determine the viscosity of petroleum products at specified temperatures between 70 to 210 °F. Stainless steel made, the Saybolt viscometer is supplied complete with two interchangeable...
Flash point
Ø To determine the open-cup, flash and fi re points of oil products with a fl ash point above 80°C. Calibrated cup. Gas or liquid gas lighting device above the cup. 550 W electric thermostatic...
Redwood viscometer
Ø Used to determine the viscosity of cut-back bitumen and road oil. The instrument consists of a stainless steel bath (tank), agitator, rheostat, immersion electric eater with digital thermostat to...
Emulsified asphalt distilation
Used for the determination of cut-back asphaltic materials by the distillation test. The set is formed by: aluminium still container, glass connectors including condenser, stands, graduated cylinder,...
Softening point
For determining the softening point.
The equipment consists of:
- a set of two balls dia. 3/8, 2 rings, 2 centering collars.
- two-gang framework to support rings, collars and balls and for...
Ductilometer
Ø The ductility of bituminous materials is determined by measuring the elongation before failure of a sample subjected to tensile stress in pre-determined conditions of speed and temperature (50...
Penetrometer
Used to determine the consistency of a bituminous sample under fixed conditions of load, time and temperature. The penetration is expressed in distance of tenths of millimeters vertically...
Water bath
Ø The internal tank and cover are stainless steel made, outside box is from painted steel sheet with wool insulation. The specimens are held by a stainless steel perforated shelf spaced from the...
Marshall compression frame
Ø Ruggedly constructed with frame to encompass the strain and loads, easy to use, it is designed to operate with the minimum of maintenance.
Platen rate is 50.8 mm/minute also maintained under load...
Mixer
Ø Planetary speeds: 62 and 125 r.p.m.
(clockwise)
Ø Beater speeds: 140 and 285 r.p.m. (anticlockwise)
Ø The stainless bowl has a 5 litre capacity and quickly engaging clasps ensure that it is...
Marshall compactor
Ø This ruggedly constructed apparatus automatically compacts the bituminous sample and stops off the motor after the preset number of blows has been completed on the automatic digital display...
Core drilling machine
This rugged, compact and portable machine with vertical screw feed, is used for pavement core sampling where it is not easy to get electrical power.
Petrol engine 5 HP power, 4-cycle Briggs &...
Vakum picnometer
Transparent plexiglass made, complete with valve and gauge, it is utilized for a rapid determination of asphalt content, bulk specific gravity of aggregates, the max. theoretic specific gravity of...
REFLUX EKSTRAKTOR
This apparatus consists of a cylindrical glass jar containing a stainless steel wire basket cloth opening 0,074 mm. The asphalt sample (max. quantity 4000 g) is placed inside the wire basket, the...
Continuous flow centrifuge
Designed for quick filterless separation of filler from binder solution or other mixtures containing sediments (cement, soil, clay), in suspension. As no filter is required, there is no dispersion of...
SANTRFUJ EKSTAKTOR
Ø Used for the determination of bitumen percentage in bituminous mixtures.
It consists of a removable, precision machined aluminium rotor bowl and cover (accessory 1500 or 3000 g capacity), housed...
Methylenlene blue
* Electric stirrer adjustable from 400 to 700 rpm, complete
with 70 mm dia. propeller. 200-240 V 1ph 50 Hz
* Support base for stirrer
* Burette 50 x 0,1 ml with stopcock
* Support base...
Abrasion tester
Ø Used to determine the resistance to deep abrasion of natural stones and concrete products. Abrasion resistance is
determined by measuring the length of the groove produced in the surface of the...
Sieve shaker
Sieve Shaker is activated by an electric motor. It can hold up to 8 Sieves dia. 200 mm or 8 inch plus pan and lid, and it is possible to perform also wet sieving tests
Provided of timer 0-60...
High capacity sieve shaker
Ø Designed for sieving considerable quantities of any material. The screen shaker accepts up to 30 litres (60 ÷ 70 Kg) of sample. Sturdy made, the machine can hold six screen trays and dust...
Mikrodeval
Ø To determine the resistance to wear of aggregates contained in a rotating cylinder with abrasive charges. The machine essentially comprises a heavy steel frame on which four stainless steel...
Losangles
Ø Used to measure the resistance of aggregates to abrasion. The machine has a steel frame that supports the drum. 1 hp electric motor and speed reducer turn the drum at 30-33 rpm. Abrasive charges...
See More Item(s) from This Company
