Machines of this series bond aluminum or gold wires from 0.0007 in. to 0.002 in. diameter, gold ribbon 0.0005 in. by 0.002 in. through 0.001 in. by 0.010 in. by the wedge-wedge technique using ultrasonic energy to attach aluminum wire at room temperature and adding work piece heat for gold wire. Wire is fed to the work point by two methods selectable by exchange of wire clamps; either diagonally through the heel of the bonding wedge, or vertically down through a hollow wedge. Either allows programmed motions to clamp, break, and feed wire continuously,... View full description
Web address: http://www.acrosemi.com Address: Linh Trung Ward, Thu Duc District,, Ho Chi Minh City, Vietnam
Phone: 84-0-95 701 6968
Detailed Product Description
Machines of this series bond aluminum or gold wires from 0.0007 in. to 0.002 in. diameter, gold ribbon 0.0005 in. by 0.002 in. through 0.001 in. by 0.010 in. by the wedge-wedge technique using ultrasonic energy to attach aluminum wire at room temperature and adding work piece heat for gold wire. Wire is fed to the work point by two methods selectable by exchange of wire clamps; either diagonally through the heel of the bonding wedge, or vertically down through a hollow wedge. Either allows programmed motions to clamp, break, and feed wire continuously, but requires front-to-back bonding direction. This machine is very easy to use.
STANDARD SPECIFICATIONS:
CONTROL LOGIC: Motorola 68000 Microprocessor
MEMORY: Battery back-up RAM
DATA ENTRY: Selector switch
Z TOOL RANGE: 0.5 inch
Z ENCODER RESOLUTION: 0.001 inch
BOND FORCE RANGE: Adjustable, 10 to 150 grams
TRANSDUCER: ½ wave, 63 KHz (nominal)
ULTRASONICS: Built-in, 8 bit, 4 watts (Ultrasonic Positioning Utility)
WIRE RANGE: 0.7 to 2.0 mils, 1x10 mil gold ribbon (7600D)
ESD PROTECTION: Protection against Electrostatic Discharge
DISPLAY: 4 line, 40 character LCD
CONVENTIONAL TOOL LENGTH: 0.750 inch (7400D)
DEEP ACCESS TOOL LENGTH: 0.750 inch (7600D)
MICROMANIPULATOR: Dual counterbalanced, single lever, 8:1 ratio
WIRE SPOOL MOUNT: 0.5 inch with ball bearing rollers
RADIANT TOOL HEAT: Built-in
MICROSCOPE: Selection available (ESD types available)
ILLUMINATOR: Selection available (ESD types available)
WORK HOLDERS: Wide selection plus custom fabrication services
Mask Aligner
Neutronix-Quintel (NXQ) is a leading provider of microlithography equipment for the Opto-electronic, Microsystem and Nanotechnology markets. Our unique history gives us critical experience and...
Screen & Stencil Printer
AMI screen printers have you covered! Our precision screen printers take care of your present advanced packaging requirements, yet allow convenient and economical field upgrades to meet the future as...
Manual Ball and Wire Bonders - West Bond Model 747677E (
Triple Convertible Machines: Including Model 7476E and Model 7700E. This machine with three bond tool heads, 45° head, 90° head, and ball bonding head, all convertible. This machine is very easy to...
Manual Ball Bonder - West Bond Model 7700D
Single Ball or Ball-Wedge Wire Bonder.
Machines of this series bond gold wires ranging from 0.0007 in. to 0.002 in. Bonds are made by the ball-to-wedge technique using ultrasonic energy and work...
Manual Die Bonder - West Bond Model 7200CR (Epoxy Die Bonder)
Model 7200CR provides separate functions on the same tool head to dispense epoxy, then to pick up chips, rotate them into alignment, and place them. All operation is controlled by West·Bond unique...
View full description
Detailed Product Description
