Spiral wound gasket
1. Structure
The wound style gasket consists of "V-shape"(or"W-shape")metal tape and nonmetal tape,which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
2.Performance and Features
1. Wide range of applicable working condition,high temperature and high pressure resistance,applicable to super low temperature and vacuum condition.Chemical resistant gasket is available under various medium,through change of composition of gasket.View full description
Web address: http://www.faithseal.com Address: 15th jinshan R.D, Cixi, Zhejiang, China
Phone: 0086-574-81317100 - Fax: 0086-574-63225959
Detailed Product Description
Spiral wound gasket
1. Structure
The wound style gasket consists of "V-shape"(or"W-shape")metal tape and nonmetal tape,which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
2.Performance and Features
1. Wide range of applicable working condition,high temperature and high pressure resistance,applicable to super low temperature and vacuum condition.Chemical resistant gasket is available under various medium,through change of composition of gasket.
2.Strong stress compensation,stable and reliable sealing performance even under frequent pressure fluctuation condition.
3.Perfect sealing performance.
4.Normal requirement of flange surface finishing which contact with gasket.
5.Easy installation and low pre-tightening stress of gasket.
3.Kinds of Gasket
1.A.Wound style gasket consists of four type:basic type,with inner ring,with outer ring,and with inner and outer rings. B.Heat exchanger wound style gasket:basic type and with inner and outer rings.
2. Normally matrial used:
A.Steel tape:08F,0Cr18Ni9(304),0Cr18Ni9Ti,1Cr18Ni9Ti(321),0Cr17Ni12,M02(316),00Cr17Ni14M02(316L).
B.(Cold roll)steel plate for inner and outer ring:Outer ring:mild steel,0Cr13 and 0Cr18Ni9
Inner ring:same as steel tape,special order is a available through negotiation.
C.Nonmetal tape:flexible graphite,special made asbestos,teflon and non-asbestos paper.
4.Scope of Application
1. Working temperature:-196 -700(not higher than 600 in oxidic medium)
2.Working pressure:25MPa
3.Gasket coefficient:m=2.5-4
4.Min.pre-tightening specific pressure:y68MPa
5.Max.machinable size:-2800mm
Fancy hu /Faith
Cixi Faith Sealing&packing Co.,Ltd
No15# Jinshan Rd,Cixi,Zhejiang,China.
Mob :0086-574-81317100
E-mail: info@faithseal.com
www.faithseal.com
See More Item(s) from This Company
Seal machines&equipment&equipment
Seal machines&equipment&equipment
Faith multitudinous products with 6 series can satisfy various industrial demands for sealing and insulation.
(1)Gland Packings:Made from Flexible graphite,...
Packing tools
Packing tools
Packing tools,used for braided various of fiber packings,including :
6 Packing Tools with Flexible Shafts;
3 Packing Tools with Solid Shafts and Pick Tips;
9 Removable Corkscrew...
Rubber sheet
Rubber sheet
Black plate finish neoprene rubber sheet
Black plate finish Nitrile rubber sheet
Black plate finish commercial grade rubber sheet
White food quality rubber sheet
Cloth insertion...
Non-asbestos sheet
Non-asbestos sheet
Non-asbestos sheet This sheet is composed of fibres of high temperature resistance and fine chemical stability. It is adhered by sythetc adhesive and nonstick agent is applied...
Graphite sheet
Graphite sheet
Flexible graphite sheet is made from flake graphite with high carbon content which is gone through chemical treatment, expanding under high temperature and then rolling.It has the...
Glass fiber cloth
Glass fiber cloth
It is woven by best quality texturized glass fiber yarn , it was the high quality, warm keeping thermal insulator, it is the ideal substitute of the asbestos cloth.
The...
Ceramic fiber cloth
Ceramic fiber cloth
Ceramic Fiber cloth is used as heat insulating materials and an excellent substitute for asbestos cloth. Ceramic fiber cloth with metallic (nickel wire or stainless wire) are...
Comprofile gasket
Comprofile gasket
1.Structure
Corrugated gasket is made of machined flat metallic plate with waved or corrugated surface in 90 degree angle.
The corrugated gasket with inner and outer rings or...
Corrugated gasket
Corrugated gasket
1.Structure
Corrugated gasket is made of machined flat metallic plate with waved or corrugated surface in 90 degree angle.
The corrugated gasket with inner and outer rings or...
Double jacket graphite gasket
Double jacket graphite gasket
1.Structure
Metal clad gasket is a composite gasket with internal nonmetal material such as flexble graphite,teflon,asbestos-rubber sheet and ceramic fiber which is...
View full description
Detailed Product Description
