Linear Power Supply

Linear Power Supply Single, dual and triple outputs Input: 100/117/220/230-240 VAC or 240/480 VAC Rated full load at 50°C Overload and short circuit protection Remote sense compensates for line drop and assures voltage at the load Reverse polarity protection Overvoltage protection (OVP) standard on 5V main outputs Open sense lead protection Designed to meet domestic and international safety standards ... View full description Tags   Series   BVA   Web address: http://www.powervolt.com Address: 300 Factory Road, Addison, Illinois, United States Phone: 001-630-628 9999 - Fax: 001-630-628 9922

Detailed Product Description

Single, dual and triple outputs Input: 100/117/220/230-240 VAC or 240/480 VAC Rated full load at 50°C Overload and short circuit protection Remote sense compensates for line drop and assures voltage at the load Reverse polarity protection Overvoltage protection (OVP) standard on 5V main outputs Open sense lead protection Designed to meet domestic and international safety standards 2 year warranty The International Series BVA The BVA series is the premium grade, open frame line of linear DC power supplies. Designed to operate over a wide range of AC power sources found worldwide, the BVA series is especially suited to OEM applications where cost savings is a significant factor. The field selectable universal input (100/117/220/230-240 VAC) reduces your inventory cost by allowing you to use just one standard model regardless of destination. Value Added Services PowerVolt offers a wide variety of value added services and design features to meet your application requirements. The first and foremost service we offer is our flexibility to design custom units for your application. Other features include, but are not limited to, terminal blocks, mounting spacers, fuse and fuse holders, line cords, etc. Specifications AC Input: Standard models: field selectable taps for 100/117/220/230-240 VAC ±10%; 47-63 Hz. For 50 Hz operation derate output by 10%. "480" models: 240/480 VAC ±10%; 47-63 Hz. DC Output: See Selection guide for voltage / current ratings. The output is floating; either positive or negative terminal can be grounded. Output range is ±10%, except variable 10-18V outputs. Line Regulation: ±0.05% for 10% line change Load Regulation: ±0.05% for 50% load change Thermal Regulation: ±0.02% per °C maximum, ±0.005% per °C typical Output Ripple: 2 mV RMS maximum, 3 mV P-P Dynamic Response: 30 µS for 50% load change Stability: ±0.3% for 24 hour period after 1 hour warm-up Short Circuit and Overload Protection: Foldback current limiting, set at 120% of nominal Overvoltage Protection: Crowbar overvoltage protection is standard on all 5VDC main outputs and is factory set at 6.2V±0.4V (fixed). Optional OVP module adjustable from 4.5 to 36V is available for other models. Remote Sensing: Standard on all models above 30 watts. Remote sensing will compensate for a cable drop of 0.25V. Protected against open or shorted sense leads. Twisted pair sense leads are recomended. Efficiency: 5V units: 45%; 12 and 15V units: 55%; 24V and higher units: 60% Operating Temperature: 0°C to 50°C full rated load, derate linearly to 40% at 70°C. See derating chart. Storage Temperature: -55°C to +85°C Vibration: Per MIL-STD-810B, Method 514, Procedure 1, Curve AB (to 50 Hz) Shock: Per MIL-STD-810B, Method 516, Procedure V Safety Standards: Designed to meet safety regulations of UL, CSA and other international standard Finish: Clear aluminum chassis. Chassis also serves as heat sink.

See More Item(s) from This Company

Isolation transformer Step-up or step-down isolation transformer Field selectable taps allow many possible voltage ratings Industry grade, conservative and reliable design 2500V r.m.s. hipot is standard Dual...

Microprocessor power transformer Transformer for triple output power supplies used in microprocessor, Op-amp and other logic circuits Printed circuit or panel mount Low profile or small mounting surface models Class B...

Class2 Transformer Power Rating 25VA to 80VA Dielectric strength - 4000VRMS Primaries - Dual primaries (115/230V - 50/60Hz) Secondaries - Single secondaries Class 2 Rating - Inherently or non-inherently limited...

Triple output Power Transformer 25VA-80VA Power Rating 25VA to 80VA Dielectric strength - 4000VRMS Primaries - Dual primaries (115/230V - 50/60Hz) Input range (100V to 130V to 260V - 50/60Hz) Secondaries - Dual complementary output...

Power Transformer 25VA -175VA Power Rating 25VA to 175VA Dielectric strength - 4000VRMS Single or Dual primaries (115/230V - 50/60Hz) Series or Parallel secondaries Electrosatic Shield - Not required, dual bobbin Solder...

Power Transformer Panel mounting Printed circuit mounting International Series Custom designs 2 Year warranty

Unregulated Open Frame DC Power Supplies Low cost unregulated DC power supplies Field selectable input taps 103/115/126/207/230/253 VAC for fine-tuning output to match actual field conditions Improved ripple - 3% maximum Fuse...

Three phase open frame DC power supply Unregulated DC output 480V, 3-phase input eliminates need for step-down transformer Field selectable 430/460/480/500/530V input tap Finger-safe and creepage-proof screw terminal...

Stepper power for stepping motor Full compatible with Pacific Scientific (and other) stepping motor driver sreies 5200, 5300, 5400, 6400 Space saving compact modules provide mounting studs for motor drivers Integral motor and...

Switch mode power supply Single and Multiple outputs, 30 to 180 watts Worldwide AC input range 90 to 264 VAC Choice of tightly regulated, high peak current auxiliary outputs Extremely versatile output configuration for...

Add to Favorites - Printer-Friendly  Selling LeadsBuying LeadsProductsCompanies   Advanced Search