1 Screw elevator:
The plank of the material entrance on it can control the material current capacity according to the capacity of pellet mill machine.
2 Pellet mill:
The moisture of the material ranges from 13% to 18%;
The matrix wearing in the good foundation should adjust the cleft of the rollers and the circle- matrix to good situation (0.1-0.3 millimeter)
3 Bucket elevator
Connecting the pellet mill and elevator using the bucket
Keep reinforce when installed, and adjust the screw rod to tighten the... View full description
Web address: http://www.yulongjixie.com Address: Xiuhui, Zhangqiu,Jinan, Shandong, China
Phone: 86-531-83473391 - Fax: 86-531-83483378
Detailed Product Description
1 Screw elevator:
The plank of the material entrance on it can control the material current capacity according to the capacity of pellet mill machine.
2 Pellet mill:
The moisture of the material ranges from 13% to 18%;
The matrix wearing in the good foundation should adjust the cleft of the rollers and the circle- matrix to good situation (0.1-0.3 millimeter)
3 Bucket elevator
Connecting the pellet mill and elevator using the bucket
Keep reinforce when installed, and adjust the screw rod to tighten the transmission and electrical engineering belt.
4 The tower type vibrating cooler:
Unload the fixed conveyance stud bolt first, then install perpendicularly and steadily.
The air blower should confirm the rotation direction, and bound and connected with separate machine using the cloth sack.
The blow exit (90 degrees curved) above separate machine should be bound a long cloth sack, self-provided by the clients, with the diameter of 40 centimeters &length of 5 meters.
Check whether material is even or not through the observation of each layer, and the general thickness is 1-3 centimeters. If the material stores excessive, you can adjust the rotation degrees of the vibration machine or the related pieces of iron on both ends.
The finished pellet product can be packaged directly, and the powder product can be palletized adding water.
5 About the products
This machine group integrates automatic inspiration grinding, mixing, palletizing, cooling, drying, and screening. Materials keep dry when gonging into and coming out of the machine. Invests few, effective is quick.
See More Item(s) from This Company
Fodder Machinery Complete Set
This machine group integrates grinding, mixing, adjusting, palletizing, cooling and drying, and screening. The technological process is continuous and rational and performance of each single machine...
SKFZ Series Shaking Staged Screener
The stream line shaped is designed for discharging hole. It can make materials neither left nor contamination.
The pressed screener structure is simple and convenient. Screener can be rotary...
SFJH Series Planar Gyratory Screener
The stream line shaped is designed for discharging hole. It can make materials neither left nor contamination.
The pressed screener structure is simple and convenient. Screener can be rotary...
SKLN Series Counter Flow Cooler
Adopting counter flow cooling theory, pellet can be cooled fully and equally.
Slide valve discharging is used to make the operation stable and the material discharging easy and smooth.
The...
CD420 Spontaneous Imbibitions Mill and Mixer
Introduction of CD 420-1
Model: TYPE-500, TYPE-1000
Output: 500, 1,000kg/group
Power: 7.5+2.2, 11+3 (kw)
Features: compact conformation, civil house installation. Cost is low, and can be gained...
SHJ Series Single-shaft Twin Screw Mixer
CV is less than 5--7%,Mixing time 3-6 minutes. It uses manual operating, electric driving and steam driven wide opening discharge. Residual in the machine is little. It can be widely used in...
SSHJ Series Dual-shaft Oar Mixer
Operation speed low, mixing efficiency high, and moving is gentle. Various liquids can be added.
Mixing time is short (40-60 seconds/group), and the coefficient of variation is low (CV is less than...
9DFSeries Grass Cutter
9DF Type series multifunctional feedstuff machine is a kind of new straw processing machinery that integrates grass cutting, kneading, comminuting and pulping as a whole. By kneading, wild weed and...
Organic Fertilizer Machinery
Materials keep dry when gonging into and coming out of the machine, and there is no need to dry it(material water content is more than 13%).It uses differential gear,cardan drive,and is used together...
Grinder for Plastic and Feed
This complete set is the basic products of our factory. It has the ability of water-cooling, so it wont be carbonized or on fire. They would be the best choice for smashing PVC, rubber.
It can also...
View full description
Detailed Product Description
