GENERAL CHARACTERISTICS
PRISMAPOX® 400 AL is a multitask coating for maintenance, in general.
Self priming, can be applied on mechanically cleaned surfaces where blasting
is not possible.
High solids epoxy with low VOC content.
Excellent corrosion protection among difficult surfaces. Contains special
humidifying components that penetrates through the existing rust sketches.
Adhere to most of the existing coating. Excellent chemical resistance.
TYPICAL USES... View full description
GENERAL CHARACTERISTICS
PRISMAPOX® 400 AL is a multitask coating for maintenance, in general.
Self priming, can be applied on mechanically cleaned surfaces where blasting
is not possible.
High solids epoxy with low VOC content.
Excellent corrosion protection among difficult surfaces. Contains special
humidifying components that penetrates through the existing rust sketches.
Adhere to most of the existing coating. Excellent chemical resistance.
TYPICAL USES
Specially formulated for high protection of steel or concrete, specially for
structural steel, bridges, tanks in areas where high humidity and chemical
environment appears to be particularly aggressive.
OTHER CHARACTERISTICS
Admits a wide variety of top coats.
By means of its barrier effect, gains an spectacular protection quality
besides the inhibit effect of the layered aluminum.
Gives a certain degree of tolerance for slightly moist surfaces.
See More Item(s) from This Company
PRISMAPOX 2206 W
GENERAL CHARACTERISTICS
Product specially formulated for walls. Contains in its composition tyxotropic
agents allowing high thickness for vertical applications. In order to maintain its
cohesion...
PRISMABAR POLIURETANO
GENERAL CHARACTERISTICS
Transparent polyurethane varnish formulated from the combination of acrylic
hidroxylated resins and a hardener based on isocyanate, given a flat, glossy and
hard film,...
PRISMAPOL 50
GENERAL CHARACTERISTICS
This aliphatic finished is highly recommended for spray system applications,
outstanding outdoors resistance, as well as excellent gloss and color resistance.
Very...
PRISMACONVER 57
GENERAL CHARACTERISTICS
Acid product, specially formulated for the cleaning of substrates, contaminated
with oil, grease or petroleum derivates.
Commended for metal, concrete, and eventually for...
PRISMAPLASTIK NIEVE
GENERAL CHARACTERISTICS
It is a water born plastic paint emulsionated with water.
Resistant to alkaline supports, with a good whiteness and cover.
Recommended for all kinds of plaster works,...
PRISMAPOL TANQUES
GENERAL CHARACTERISTICS
PRISMAPOL TANQUES is an polyurethane elastometer coating solvent free,
specially formulated for high thickness. Holds great resistance to chemical pro-
ducts, solvents and...
PRISMABAR 60
GENERAL CHARACTERISTICS
Transparent glossy synthetic varnish for wood. Recommended for both interior
and exterior proposes. It is presented in semi-gloss and gloss finishes.
TYPICAL USES
For...
PRISMAFER 31
GENERAL CHARACTERISTICS
Fast dry primer for alkyds or conventional finishes. It has within inhibited
pigments being enhanced with micronized iron oxide, making it also resistant to
corrosion....
PRISMACAUCHO 515
GENERAL CHARACTERISTICS
This is a fast drying product with an excellent gloss and color retention. It holds
an outstanding resistance to chemical steam and industrial environments. It...
PRISMALUM 15
GENERAL CHARACTERISTICS
Water based paint, resistant to alkaline supports with exceptional
brightness and coating. Completely transpirable to steam and
resistant to wet friction, presents a matt...
View full description
Detailed Product Description
