Insulation Piercing Connector
Specification:
1) Main line(mm2): 50-150
2) Branch line(mm2): 6-35(50)
3) Bolt number:1
4) Application Voltage:1KV
Feature
1) Simple installation, small contact resistance and low temperature rise of the clamp
2) The applicable voltage is 10KV, 1KV or less than 1KV. ... View full description
Address: Beijing, Beijing, Beijing, China
Phone: 86-010-88558855 - Fax: 86-010-88558855
Detailed Product Description
Insulation Piercing Connector
Specification:
1) Main line(mm2): 50-150
2) Branch line(mm2): 6-35(50)
3) Bolt number:1
4) Application Voltage:1KV
Feature
1) Simple installation, small contact resistance and low temperature rise of the clamp
2) The applicable voltage is 10KV, 1KV or less than 1KV.
3) Piercing connector, simple installation, need not strip the cable coat.
4) Moment nut, piercing pressure is constant; keep good electric connection and make No damage to lead.
5) Self-seam frame, water proof, and anti-corrosion, extend the using life of Insulated lead and connector.
6) Adopted special connecting tablet, apply to joint of Cu(Ai) and Cu(Ai) or Cu and Ai
7) Small electric connection resistance, impulse current can be up to 15ka.
8) Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 6kV.
9)Aac surface design, apply to connection with the same (different) diameter, wide connection scope (0.75mm2-400mm2)
Mainly application:
1) the connection of main circuitries, the connection of main circuitry and outdoor circuitry, the connections of main circuitry and electric appliance and street lamps
2) Applicable to T connection of structural distribution system, the connection of airy low voltage insulated cable, or indoor electric wire, distribution system of street lamp.
3) Can be installed with online line and can work without power.
View full description
Detailed Product Description
