The new Mercedes device working with smart key (old and new) using in car since 1997 up to 2005 - without keylessgo system. You can program new key (ore used) in car and program oun key if its not work more.
You read and program eeprom of CPU from Steering blocking module via diagnostic connector.
Desolder and read via programmer two CPU from Electronic Ignition Control Module.
Load theese eeproms to program.
Desolder NEC CPU from the key.
Soldering it on the device ,... View full description
Web address: http://www.ufodiag.com Address: 3-402,A Zone Dongbianxincun,MinZhi,baoan,Shenzhen,prc, Shenzhen, Gongdong, China
Phone: 86-0755-81752765 - Fax: 86-0755-81752765
Detailed Product Description
Programmer keys for MB ("smart key")
The new Mercedes device working with smart key (old and new) using in car since 1997 up to 2005 - without keylessgo system. You can program new key (ore used) in car and program oun key if its not work more.
You read and program eeprom of CPU from Steering blocking module via diagnostic connector.
Desolder and read via programmer two CPU from Electronic Ignition Control Module.
Load theese eeproms to program.
Desolder NEC CPU from the key.
Soldering it on the device , select the No of key and program it.
Solder all CPU on their places and start the car.
You can program new keys without the car - only with EIS and steering blocking module.
You can read theese CPU with help ETL programmer for Motorolla CPU 68HC705X16(32).=
See More Item(s) from This Company
VAG DTC Reader
¡¡ Reads and Erases DTCs on Engine, Airbag (SRS) and Auto
Transmission. Over 6,700 DTCs definitions are displayed
when the fault code is entered. No need to refer Code List. Works on
AUDI,VW, SEAT...
EOBD plus OBDII CAN CODE READER
¡¡ This Code Reader is specially developed to work on all generic EOBD and
OBDII compliant vehicles. The OBDII / EOBD vehicles are covered from
year 1996 onwards up to the most recent models. With...
MB Carsoft 7.4 Multiplexer
MCU controlled Interface for Mercedes Benz Carsoft 7.4 which is compatible with the original interface.
MB Carsoft 7.4 Interface Multiplexed
OBD2 connection cable (all K-Lines wired)
MB 38...
OP-COM CAN BUS Interface
It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
The program lets you to read out and clear fault codes, shows you live data, lets...
Lexia-3 Interface
Dealer diagnostic scanner for comprehensive Citroen and Peugeot cars diagnostic. You can do all as a authorized dealer does.This diagnostics software allows you to perform complete diagnostics of all...
T-300 V5.8
Use for key programming. More cars than any other transponder machine .
Function introduces of T300 chip key decoder
1. Read the vehicle malfunction code
2. Clear the vehicle malfunction code...
SUPER VAG K + CAN
Function
This product can be used to odometer correction ,read Security Access Code, key programmer, airbag reset tool, TV Activation and diagnostic for VW Passat,VW ,VW Bora,VW Polo,VW Golf,Audi...
MB Star2000 V2008
PC Based Mercedes-Benz Diagnostic System WO/Laptop
Introduction
MB STAR realizes all the functions of official factory BENZ Star2000: reading out and erasing trouble code; reading the real-time...
BMW CAS3 PROGRAMMER
Mileage correction for BMW CAS / MB EZS / DASHBOARDS / MODULES / with 912 / 9s12 / 9s12x MCU, in circuit programming ( no need removing mcu ), can read / edit / write eeprom of MCU, mileage...
BMW Carsoft 6.5
Brief Introductions for Features
MCU controlled Interface for Carsoft 6.5 which is compatible with the original interface. Fully digital line switchings and MCU controlled service reset...
View full description
Detailed Product Description
