TIANHONG ELECTRIC POWER FITTING CO.,LTD

TIANHONG ELECTRIC POWER FITTING CO.,LTD

Selling Leads

Buying Leads

Products

About Us

35 Selling Lead(s)

Piercing Ground Connector
Detailed Product Description Scope of Application Applicable to 10kv, following air insulated lead earth protection and temporary prove electricity. Type Equivalent Type Voltage... - 23 Jun 2008

10KV Insulation Piercing Connectors
Detailed Product Description Scope of Application 10kv. Applicable to branch connection and succession of 10KV overhead insulated lead applicable conductor range mm2 ... - 23 Jun 2008

NES Four-core Collecting Strain Clamp
Detailed Product Description APPLICATION: for use with the end of aerial insulation lines up to 1KV,tighten up the insulation conductor. Features: The clamp has designed four core... - 23 Jun 2008

NXJ Wedge Type Over Tension Resistant Clamp
Detailed Product Description APPLICATION: NXJ series wedge type aluminum alloy overtension resistant clamp is applicable for the terminals of 1KV and 10KV (including not more than 10KV) aerial... - 23 Jun 2008

Insulation Suspension Clamp
Typical application : 1. the connection of airy low volyage insulated cable 2. T connection of low voltage insulated indoor electric wire 3. T connection of structural distribution system 4.... - 23 Jun 2008

Suspension Clamps
Detailed Product Description TYPE applicable conductor range mm2 1.1A 25-120 1.1B 25-120 - 23 Jun 2008

Strain Clamps
Detailed Product Description TYPE applicable conductor range mm2 2.1 25-70 2.2 70-120 - 23 Jun 2008

TTD Series Insulation Piercing Connectors
TTD series insulation piercing connectors TYPE applicable conductor range mm2 BOLTS QTY. (mm2) (mm2) TTD-121F 16-50 16-50 1 TTD-201F 95-70 95-70 1 TTD-281F 185-120 25-10 1... - 23 Jun 2008

Insulation Strain/Suspension Clamp
Typical application : 1. the connection of airy low volyage insulated cable 2. T connecting of low voltage insulated indoor electric wire 3. T connection of structural distribtion system 4.... - 23 Jun 2008

IPC Insulation Piercing Connector
The reason of shoosing insulation piercing connector(IPC) 1. Simple installation Can be branch of cable without off the main cable simple and reliable installation , just need sleeve spanner, can... - 23 Jun 2008

IPC and TTD Insulating piercing Connector
Piercing connector, simple installlation , need not strip the cable coat. Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead. Self-seam fram,... - 23 Jun 2008

IPC Insulation Piercing Connector
Piercing connector,simple installation, need not strip the cable coat . Moment nut, piercing pressure is constant, keep good electric cinnection and make no damage to lead. Self-seam fram,... - 23 Jun 2008

Connecting Tubes (oil seal)
These products are applicable to connect circular wire and himicycle-secor wire in distribution equipment or power supply cables . GTL series hole-passing connection tube is made of fritionwelding... - 19 Jun 2008

Connecting Tubes (oil seal)
These products are applicable to connect the circular wire and hemiccle-sector wire in distribution equipment or power supply cables .GL series hole ,passing connection in made of L3 aluminium tube... - 19 Jun 2008

Connecting Tubes (pass through)
These products are applicable to connect the cirecular wire and hemicycle-sector GT series hole-passing cinnectin tube is made of T2 copper tube . - 19 Jun 2008

Imported Copper Connecting Tubes
These products are applicable for the cinnection of the circular wire. Hemicycle wire with power supply cable in distrbution equipment .They are made of higher 99.9 percent pure T2 copper tube,and... - 19 Jun 2008

Copper connecting Terminals
These products are applicable to the connection of wires in distribution equipment power supply cable with electronic apparatus. It is made of (T2) copper tube by dic cast and coated tin. - 19 Jun 2008

Cable Lugs and Tubular Terminal
Connecting terminals are suitable for the cinjuncton of wires cable in the distribution equipment and the clectrical equipment DL series of aluminium cinnecting terminals are pressed with aluminium... - 19 Jun 2008

Copper ,Aluminium Connectings Terminals
Connecting terminals are suitable for the cinjuncton of wires cable in the distribution equipment and the clectrical equipment DL series of aluminium cinnecting terminals are pressed with aluminium... - 19 Jun 2008

Cable Lugs and Tubular Terminal
These products are siutable for the connection of copper conductors (section 1.5-1000mm2) in power cable with electronic equipment .They are made of with higher 99.9 percent pure copper tube T2 and... - 19 Jun 2008

Copper-Aluminium Connecting Terminal
DTL series ofcopper-aluminium wiring erminals are suitable for transition connection of the circular aluminium wires , hemicycle-sector aluminium wires ,power supply cables in the distribution... - 19 Jun 2008

Parallel Groove Clamp
JB series combined channel connector is applicable to weight-disburdening connection of overhead aluminium wire and splicing steel wire . JBT copper combined channel clamp is applicable to branching... - 19 Jun 2008

Imported Wintersweet Type Red Copper/Brass Jointing Clamps
It is suitable for transiion connection of the electric appliance of indoors distributing divece and kinds of wire of wire cables . It is adopts T2 red copper and the surface adopts nickels plating.... - 19 Jun 2008

Imported T/J Copper Bolt Connectors
Detailed Product Description It is suitable for the sequence and transportation of all kinds of conductors in electric netting. It is made of copper. Packing: Standard, blank carton, or paper... - 19 Jun 2008

Copper Dead-End Clamps
Detailed Product Description For standard copper conductors according to DIN 48201 Material: body: high strength copper alloy (CuNi2Si) Bolts: DIN 933, high strength copper alloy (R60). Option... - 19 Jun 2008

Aluminium Dead-End Clamps
Detailed Product Description For aluminum and aluminum alloy conductors are made according to DIN 48201 and ACSR Conductors are made to according to DIN 48204 Body: corrosion resistant high... - 19 Jun 2008

Copper Parallel Groove Clamps
Detailed Product Description For tap-off connection of copper conductors Body: high strength copper alloy (CuNi2Si) Bolts: high strength copper alloy, F-60, DIN 933. Nuts: copper, DIN... - 19 Jun 2008

Aluminium Parallel Groove Clamp
Detailed Product Description for tap-off connection of Al-, Al-alloy conductors acc. to DIN 48201 and ACSR conductors acc. to DIN 48204 Material: Body/Plate: High strength,corrosion resistant... - 19 Jun 2008

Bimetallic Parallel Groove Clamps With Three Bolt
Detailed Product Description For connection of aluminum conductors are made according to DIN 48201 and ACSR conductors according to DIN 48204 with copper tap-off conductors according to... - 19 Jun 2008

Bimetallic Parallel Groove Clamps With Two Bolt
Detailed Product Description CAPG CLAMP For connection of aluminum conductors are made according to DIN 48201 and ACSR conductors according to DIN 48204 with copper tap-off conductors according... - 19 Jun 2008

Bimetallic Parallel Groove Clamps With One Bolt
Detailed Product Description CAPG CLAMP For connection of aluminum conductors are made according to DIN 48201 and ACSR conductors according to DIN 48204 with copper tap-off conductors according... - 19 Jun 2008

Advanced Search