YIHUA 1000A Infrared BGA rework station Technical date: Voltage AC220V±10% Max power consumption 715W Preheating station parts: Max power consumption:540W Light-emitting components:Far infrared heating plate Temperature Range:50°C-300°C/122°F~572°F Display Type:LED Preheating area:120*120mm Infrared lamp part: Max power consumption:150W Light-emitting components:Infrared emission lamp Temperature Range:100°C-350°C/212°F~662°F Temperature Stability:±1°C Display Type:LED Effective irradiation area:35*35mm Soldering station part: Max power consumption:75W Heating components:imported heater Temperature Range:200°C-480°C/392°F~896°F Temperature Stability:±1°C(statics) Tip of ground voltage:<2mV Tip ground impedance:<2 ohm Display Type:LED Display Handle cable length:more than or equal to 100cm Feature 1. Using the new SAMSUNG microcomputer processor PID programmable temperature control technology and uses an infrared source and optics to target heat to individual components without dislodging other SMT parts by way of eddies air currents. 2. Adopt infrared weld technology which independent exploration, infrared penetration strength, components uniform heating, beyond the traditional hot air heating vowed to prevent blow off the IC surrounding small components. 3. Technician focused infrared heat is easy to target most component removal/replacement and re-work. 4. Infrared heat source bulbs are long-lived, un-expensive and easily replaced. 5. Has bright delicate, low voltage LED lighting, safety and energy conservation. 6.It has External Sensor Temperature control mode, that is detected by the sensor IC surface temperature control temperature, this function is good for freshman operation ,it is safe way protect components . 7.MountTechnology (SMT) components 15-35cm in size. 8. This machine has 540W heating system , widely to 120mm*120mm. 9. Preheating plate color is black ,from the photics point of view, black color easy to absorb heating, shorten the warm-up time. 10. Powerful human function design, with the following functions: A. Temperature correction function : Correction of temperature range:-50°C~+50 °C(Infrared lamp analog value :580). B. Celsius / Fahrenheit temperature display function 11. This machine also have soldering iron function, if you have the device ,you can used for all of the components solder ,de-soldering ,preheating ,repair all components ,especially Micro BGA components.