15 products for Jinan ODMT Fluid Control Equipment Co., Ltd
CNC Transformer Winding Wire Machine
The equipment is mainly composed of: main box, base, automatic wiring rack, interlayer insulation device, electrical control, etc. 1、This...
Transformer Winding Wire Machine
The equipment is mainly composed of main box, base, rear tailstock and electrical control. Application: High and low voltage power transformer...
CNC Busbar Processing Machine
一、CNC Busbar Processing Machine Product description This series CNC busbar processing machine has three units: punching, shearing and bending. It...
ODMT-Clinching Technogy Our clinch procedure is a proven substitute for welding, screwing & riveting. Clinching: Riveting without rivets!...
Pneumatic Hydraulic Cylinder
Application：general Fast Approach/Return Strokes High Stroke Frequencies Pneumatic Forces: 2 – 1000 kN Total stroke :up to 300 mm Power...
Pressure Pulse Testing Machine
Pressure Pulse Testing Machine has a high performance, which has adopted advanced technology abroad and combined with the actual demands at home. Its main...
Hose Pressure (Bursting) Test Equipment
1. Features: By using the compressed air as the power source, the output liquid pressure and the pressure of the driving air source pressure is in...
Air Driven Gas Booster System
Gas Pressurization System We can produce various pneumo-hydraulic pressurization systems according to customers’ requirements. These systems can be...
PLC Control Air Driven Liquid Booster System
I.Introduction The air driven-liquid booster system is controlled by PLC and outputs a liquid pressure of 0-64MPa according to requirements. Equipped...
Air Driven Liquid Booster System
We can produce various pneumo-hydraulic pressurization systems according to customers’ requirements. These systems can be used for pressure tensioning,...
Air Driven Air Booster Pump
GAB02 gas amplifier is suitable for the working environment that needs to increase the pressure of the original air compressor system. It can increase the...
Air Driven Gas Booster Pump
This series of pump uses single pneumatic non-equilibrium gas distributing valves to move to and fro automatically. The drive parts of the pump are made of...
Air Driven Liquid Pump
M-Series air driven liquid pump uses a built-in pneumatic control four-way two-position valve to move to and fro automatically. This series of product is...
Pressure Gauge Calibration Bench
ODMT MPGC series pressure gauge calibration table is applicable for testing spring tubes (C-type tube, coil spring tube, spiral tube), etc. The calibration...
Safety Relief Valve Test and Calibration Bench
Reference Standards: TSGZF001-2006, GB-T12242-2005, GB-T12241-2005, GB-T12243-2005 Range of application: applicable for the set-pressure, setback...
© 2005-2020 Bikudo
Terms of Service