YJS-525 liquid mould making silicone rubber for photo frame

Product group
Condensation Cure

Shenzhen YiJiaSan Silicone Co., Ltd.

Shenzhen YiJiaSan Silicone Co., Ltd.

Product description

YJS-525 are good for photo frame molding. It is medium hardness silicone with hardness Shore A 25

YJS-525 are good for photo frame molding. It is medium hardness silicone with hardness Shore A 25. It is a kind of of two- component materials consisting of a flowable part A which when mixed with the curing agent or catalyst,cures at room temperature by a condensation reaction.

2. Technical Datasheet

Typical general characteristics Inspection Method Value
Product data (Catalyzed A+B) Inspection Method YJS-525
Hardness Shore A 25±2
Mix Ratio A:B 100:2
Color / White
Pot life 25 ° C (77F) 30-40mins
Curing time 25 ° C (77F) 3-4 hours
Mixed viscosity mPa.s 25000±2000
Tear-strength kg/cm 25±2
Tensile-strength M.pa ≥3.8
Elongation % ≥460%
Shrinkage % ≤0.2%

Note: This is a 100A:2B mix ratio product that must be measured by weight. The choosing of suitable hardness should be according to the size and pattern design of the products. If large products and therefore multiple-piece molds are needed by customers, silicone rubber with higher hardness will be required for the molds. Conversely, soft silicon is indispensable for molds with complicated pattern and delicate details. The amount of curing agent admixture depends on the actual need of customers. More will be added for speedy drying and fast release and less when otherwise.

1.Low viscosity
2.great flexibility
3.Extra low shrinkage
4.Chemical resistance
5.release properties
6.Easy to work with
4.High tear strength
5.Heat Resistance
6.various color is available
7.High reproduction rate

Part A: Silicone rubber is a white liquid
Part B: Catalyst is a non-toxic and odorless liquid, white transparent color.
ATT: We can provide fast/medium/slow catalyst of for hot, warm or cold season.

When stored at or below 32°C (89.6°F) in the original unopened containers, YJS-5 series Silicone Base and its Curing Agents have a usable life of 12 months.

Silicone base:1kg/drum; 20kg/drum;25kg/drum;200kg/drum.
Curing Agent: 30g/bottle; 1kg/bottle

Supplier info

Business type
Year established
Exports to

More from this supplier