YJS-520 flexible rtv-2 silicone rubber for samll GRC Molding

Product group
Condensation Cure
Origin
China

Shenzhen YiJiaSan Silicone Co., Ltd.

China
Shenzhen YiJiaSan Silicone Co., Ltd.

Product description

YJS-520 is flexible rubber with hardness Shore A 20, which is great for small grc, gfrc, grg molding.

1. Description
YJS-520 is flexible rubber with hardness Shore A 20, which is great for small grc, gfrc, grg molding.

2. Features
-Amazing fluidity and easy to operate
-Complex design available
-Not Oily
-Stable quality, non-toxic and odorless catalyst provided
-Easy de-molding
-Excellent tension and tear strength
-High performance in duplication
-Shrinkage is almost zero (below 0.2)
-Excellent resistance to weather, temperature, aging, acid and aging-proofing.

3.Technical datasheet

Typical general characteristics Inspection Method Value
Product data (Catalyzed A+B) Inspection Method YJS-520
Hardness Shore A 20±2
Mix Ratio A:B 100:2
Color / White
Pot life 25 ° C (77F) 30-40mins
Curing time 25 ° C (77F) 3-4 hours
Mixed viscosity mPa.s 18000±2000
Tear-strength kg/cm 20±2
Tensile-strength M.pa ≥3.1
Elongation % ≥480%
Shrinkage % ≤0.2%

4. Using instructions
Step 1: Prepare and clean the prototype.
You must make sure your original molds perfect. fix the original mold on a board , then using some assistant material(like cardpaper) to make a frame for to surround the prototype. The frame is no need ,if we make the mold by brushing way .

Step 2: Take the silicone and catalyst as the ratio 100:2 (silicone:catalyst=100:2) ,mix the silicone rubber and catalyst evenly.
*Notes: Molding silicon rubber is a kind of flowing liquid and it contains two parts. Part A is a kind of flowing liquid and part B is the curing agent. Remember to mix part A and part B evenly, otherwise the silicon rubber will be partly solidified and this will bring troubles for your final operation. What’s more, the finished molds will have a short life. All of these will cause a waste of silicon rubber.

Step 3: Vacuum pumping
After mixed the silicone evenly, it is better to release the bubble by Vacuum pumping.

Step 4: Pouring cast or brushing cast
After released the bubble, we can pour/brush the silicone rubber on the prototype
*Notes:Please finished all the steeped within the operation time .If not it will cause cross linking reaction, and no more further steps will be available.So,we have to pay attention to the pot life and curing time.

5.Appearance
Part A: Silicone rubber is a white liquid
Part B: Catalyst is a non-toxic and odorless liquid, white transparent color.
ATT: We can provide fast/medium/slow catalyst of for hot, warm or cold season.

6.SHELF LIFE:
When stored at or below 32°C (89.6°F) in the original unopened containers, YJS-5 series Silicone Base and its Curing Agents have a usable life of 12 months.

7.Package
Silicone base:1kg/drum; 20kg/drum;25kg/drum;200kg/drum.
Curing Agent: 30g/bottle; 1kg/bottle

Supplier info

Business type
Manufacturer
Year established
2008
Location
China
Exports to
Worldwide

More from this supplier