YJS-520 shoe sole mold making liquid silicone rubber

Product group
Condensation Cure
Origin
China

Shenzhen YiJiaSan Silicone Co., Ltd.

China
Shenzhen YiJiaSan Silicone Co., Ltd.

Product description

YJS-525 is good for shoe sole molding products. They are widely used for manual mold making, shoes molds, plaster models, sole sampling, sand casting, etc.

1.Description
YJS-525 is good for shoe sole molding products. They are widely used for manual mold making, shoes molds, plaster models, sole sampling, sand casting, etc.

2. Technical Datasheet

Typical general characteristics Inspection Method Value
Product data (Catalyzed A+B) Inspection Method YJS-525
Hardness Shore A 25 ± 2
Mix Ratio A:B 100:2
Color / White
Pot life 25 ° C (77F) 30-40mins
Curing time 25 ° C (77F) 3-4 hours
Mixed viscosity mPa.s 25000± 1000
Tear-strength kg/cm 25± 2
Tensile-strength M.pa 4.0 ± 0.5
Elongation % 450± 50
Shrinkage % ≤0.2%

Note: This is a 100A:2B mix ratio product that must be measured by weight. The choosing of suitable hardness should be according to the size and pattern design of the products. If large products and therefore multiple-piece molds are needed by customers, silicone rubber with higher hardness will be required for the molds. Conversely, soft silicon is indispensable for molds with complicated pattern and delicate details. The amount of curing agent admixture depends on the actual need of customers. More will be added for speedy drying and fast release and less when otherwise.

3. FEATURES
1.Low viscosity
2.great flexibility
3.Extra low shrinkage
4.Chemical resistance
5.release properties
6.Easy to work with
4.High tear strength
5.Heat Resistance
6.various color is available
7.High reproduction rate

4.Appearance
Part A: Silicone rubber is a white liquid
Part B: Catalyst is a non-toxic and odorless liquid, white transparent color.
ATT: We can provide fast/medium/slow catalyst of for hot, warm or cold season.

5.SHELF LIFE:
When stored at or below 32°C (89.6°F) in the original unopened containers, YJS-5 series Silicone Base and its Curing Agents have a usable life of 10 months.

6.Package
Silicone base:1kg/drum; 20kg/drum;25kg/drum;200kg/drum.
Curing Agent: 30g/bottle; 1kg/bottle

Supplier info

Business type
Manufacturer
Year established
2008
Location
China
Exports to
Worldwide

More from this supplier