YJS-625 two component addition cure liquid silicone for polyester casting

Product group
Platinum Cure Mold
Origin
China

Shenzhen YiJiaSan Silicone Co., Ltd.

China
Shenzhen YiJiaSan Silicone Co., Ltd.

Supplier info

Business type
Manufacturer
Year established
2008
Location
China
Exports to
Worldwide

YJS-625 is a two-component 1:1 Mix addition (platinum) cured RTV silicone rubber which cures at room temperature. Because of its considerable fluidity, it is recommended for the duplication of models with many undercuts.

1. Description
YJS-625 is a two-component 1:1 Mix addition (platinum) cured RTV silicone rubber which cures at room temperature. Because of its considerable fluidity, it is recommended for the duplication of models with many undercuts. This stuff is really thin!

2.Features
*high chemical resistance to the aggressive components of some types of resin
*High resistance to laceration (this characteristic guarantees high resistance to wear and tear)
*High level of accuracy in reproducing very small particulars
*High dimensional stability over time and non-deformability
*Considerable resistance to high temperatures and to ageing
*Excellent non-stick effect
*Soft, stretchy, high tear resistance,
*Will not shrink in service
PLATINUM CURE for HIGH PRECISION Jewelery; Art; Industrial & Architectural molds — Highest quality in the world. Room temp cure TIME OF ABOUT 2 Hours.
Shore hardness of 25A – Will not shrink in service.

3. Common uses of YJS-625 Platinum Cure Silicone:
*Wax
*Urethane (polyurethane)
*Plaster Hydrocal, Hydrostone
*Polyester casting resin
*Low melt metals (mold life can be short)
*Cement, Concrete
*Epoxy
*Soap
*Chocolate

4.Technical datasheet

Typical general characteristics Inspection Method Value
Product data (Catalyzed A+B) Inspection Method YJS-625
Hardness Shore A 25±2
Mix Ratio A:B 1:1/10:1
Color / translucent
Pot life 25 ° C (77F) 30-40
Curing time 25 ° C (77F) 3-4
Mixed viscosity mPa.s 6000±1000
Tear-strength kg/cm 22±2
Tensile-strength M.pa 4.5±1.0
Elongation % 500±50
Shrinkage % 0.1

5.Appearance
Part A: a non-toxic and odorless liquid with translucent color and platinum inside.
Part B: a non-toxic and odorless liquid with translucent color.
ATT: We can do any curing time as your requirements.

6.SHELF LIFE:
When stored at or below 32°C (89.6°F) in the original unopened containers, YJS-6 series Silicone have a usable life of 12 months.

7.Package
1kg/drum; 20kg/drum;25kg/drum;200kg/drum.

More from this supplier