YJS-635 no deformation platinum cure rtv molding silicone rubber
- Product group
- Platinum Cure Mold
Shenzhen YiJiaSan Silicone Co., Ltd.
YJS-635 is a two-component 1:1 Mix addition (platinum) cured RTV silicone rubber which cures at room temperature. YJS-635 is a harder material, with a 35A Shore hardness.
YJS-635 is a two-component 1:1 Mix addition (platinum) cured RTV silicone rubber which cures at room temperature. YJS-635 is a harder material, with a 35A Shore hardness. YJS-635 offers tremendous versatility and are suitable for making production molds of any configuration, large or small. These silicones exhibit good chemical, abrasion and heat resistance, which are used for rapid prototyping, wax casting (foundries and candle makers), architectural restoration and for casting concrete.
*high chemical resistance to the aggressive components of some types of resin
*High resistance to laceration (this characteristic guarantees high resistance to wear and tear)
*High level of accuracy in reproducing very small particulars
*High dimensional stability over time and non-deformability
*Considerable resistance to high temperatures and to ageing
*Excellent non-stick effect
*high tear resistance,
*Will not shrink in service
3. Common uses of YJS-635 Platinum Cure Silicone:
*Plaster Hydrocal, Hydrostone
*Polyester casting resin
Typical general characteristics Inspection Method Value
Product data (Catalyzed A+B) Inspection Method YJS-635
Hardness Shore A 35±2
Mix Ratio A:B 1:1/10:1
Color / translucent
Pot life 25 ° C (77F) 30-40
Curing time 25 ° C (77F) 3-4
Mixed viscosity mPa.s 8000±1000
Tear-strength kg/cm 24±2
Tensile-strength M.pa 5.5±1.0
Elongation % 450±50
Shrinkage % 0.1
Part A: a non-toxic and odorless liquid with translucent color and platinum inside.
Part B: a non-toxic and odorless liquid with translucent color.
ATT: We can do any curing time as your requirements.
When stored at or below 32°C (89.6°F) in the original unopened containers, YJS-6 series Silicone have a usable life of 12 months.
1kg/drum; 5kg/drum;10kg/drum; 20kg/drum;25kg/drum;200kg/drum.
- Company name
- Shenzhen YiJiaSan Silicone Co., Ltd.
- Business type
- Year established
- Exports to
More from this supplier
YJS-V25 addition cure silicone for reuseable vacuum bags
brushable platinum cure silicone rubber
YJS-H50 clear liquid silicone rubber with platinum catalyst
YJS-620 Low shrinkage addition cure liquid silicone rubber for tire mold
YJS-640 low shrinkage liquid silicone rubber for rapid prototying
YJS-630 RTV-2 silicone rubber for Resin Injection Molding
YJS-645 no shrinkage liquid silicone rubber for mold making
YJS-650 high Shore A hardness rtv-2 silicone rubber for mold making