YJS-715 addition cure food grade rtv2 silicone rubber for cake mold

Product group
Food Grade Mold
Origin
China

Shenzhen YiJiaSan Silicone Co., Ltd.

China
Shenzhen YiJiaSan Silicone Co., Ltd.

Supplier info

Business type
Manufacturer
Year established
2008
Location
China
Exports to
Worldwide

YJS-715 is great for making silicone cake molds. They have FDA certificate and excellent for highly detailed cake molds and complex design. They are also very suitable for making ice trays molds, baking molds, casting butter and other application you can image to produce foods.

1.Features:
-Amazing fluidity and easy to operate
-Platinum-based, food-grade silicone (environmental friendly, odorless -and non-toxic)
-Delicate design available
-Mixing ration: 1:1, easy to mix
-Easy de-molding
-Excellent tension and tear strength
-High performance in duplication
-Shrinkage is almost zero (below 0.1)
-Excellent resistance to weather, temperature, aging, acid and aging-proofing.
-High resistance to high temperature and aging(resist -60℃ to 250℃)
-Food safe

2.Appearance:
Part A:a non-toxic and odorless liquid with translucent color and platinum inside.
Part B: a non-toxic and odorless liquid with translucent color.
ATT: We can do any curing time as your requirements.

3.Application:
YJS-715 is great for making silicone cake molds. They have FDA certificate and excellent for highly detailed cake molds and complex design. They are also very suitable for making ice trays molds, baking molds, casting butter and other application you can image to produce foods.

4.Technical Datasheet

Typical general characteristics Inspection Method Value
Product data (Catalyzed A+B) Inspection Method YJS-715
Hardness Shore A 15±2
Mix Ratio A:B 1:1/10:1
Color / translucent
Pot life 25 °C (77F) 30-40
Curing time 25 °C (77F) 3-4
Mixed viscosity mPa.s 4000±1000
Tear-strength kg/cm 14±2
Tensile-strength M.pa 3.5±1.0
Elongation % 550±50
Shrinkage % 0.1

5.Warm Tips:
The surfaces with which the material comes in contact must be perfectly clean, free of grease and dry.
Close the bottles after use so as not to confuse the cap of the catalyst with that of the base when re-sealing.
Be aware of possible cross-contamination; it’s highly recommended to use only dedicated gear when processing poly-addition RTV2 silicone rubber (including degassing devices).
Be aware that contact with certain material can inhibit the curing of the RTV2 poly-addition silicone rubber. Common contaminants to be avoided include:
-Natural or synthetic rubber, vulcanized with sulphur derivatives.
-Poly-condensation RTV catalyzed with metallic salts.
-PVC stabilizing agents.
-Amine cured epoxies.
-Sulphur, tin and amines derivatives.
-In case of doubt, carry out a small test by pouring the mixture onto a small area of the object.

6.Package
Part A:1kg/drum; 20kg/drum;25kg/drum;200kg/drum.
Part B:1kg/drum; 20kg/drum;25kg/drum;200kg/drum.

More from this supplier