Addition type rtv2 liquid silicone rubber for pad printing

Product group
Pad Printing Silicone
Origin
China

Shenzhen YiJiaSan Silicone Co., Ltd.

China
Shenzhen YiJiaSan Silicone Co., Ltd.

Supplier info

Business type
Manufacturer
Year established
2008
Location
China
Exports to
Worldwide

platinum cure YJS-1 series is mainly applicable to plastics toys, electroplating products, electronic toys, trademarks and products with irregular pattern. The silicone pad is a medium which transfer patterns on the steel plate onto the electronic toy products' surface.

1.Applications
YJS platinum cure YJS-1 series is mainly applicable to plastics toys, electroplating products, electronic toys, trademarks and products with irregular pattern. The silicone pad is a medium which transfer patterns on the steel plate onto the electronic toy products' surface.

2.Features
-abrasion resistance
-high temperature resistance
-good printing effect
-Without any inpurities
-Odorless
-Skin safe
-High resistance to high temperature and aging(resist -60 to 250°C)

3.Operation instructions of Transfer Printing Silicone rubber Great Pringting Effects:
1.)Firstly, prepare all the necessary tools ,like the pad mold, a cup used for mixing, a glass stick, a wooden board with several holds and the size should be the same as the pad

2)Adjust the ratio between the silicon rubber and silicon oil according to the customer’s requirement.
If customers want to print large patterns, soft silicon pad is needed and more silicon oil should be added. Otherwise,hard silicone pad is needed, less or none silicone oil should be added.
In general, the silicone pad with 15-25 shore A is most suitable.More silicone oil added, the silicone pad is more soft,which will lead to less printing times ,the rising of costs and
waste of raw materials. For the molecular of silicone will be destroyed by silicone oil ,which leads to wear-resisting, solvent resistance and easy aging

3)weight the silicon and catalyst exactly based on the ratio of 1:1.
Pls kindly note that the amount of catalyst should be the same of the total weight of silicone and silicone oil.

4)weight the silicon and catalyst exactly based on the ratio of 1:1
Pls kindly note that the amount of catalyst should be same of the total weight of silicone and silicone oil.

5)Vacuum pumping to de-air. The time is around 3-5 mins.

6)4-6 hours later, the silicone is cured completely. Get silicone pad from the mold and a printing pad is completed.

4. Package
Part A:1kg/drum; 5kg/drum; 20kg/drum;25kg/drum;200kg/drum.
Part B:1kg/drum; 5kg/drum; 20kg/drum;25kg/drum;200kg/drum.

5. Storage and shelf life
When stored in their original unopened packaging, at a temperature of between -10°C and +30°C, the RTV YJS-1 series can be stored for 12 months from the date of manufacture clearly marked on the packaging. Beyond this date, YJS Silicone no longer guarantees that the products meet the sales specifications.

6.Technical Data

Typical general characteristics Inspection Method Value
Product data (Catalyzed A+B) Inspection Method YJS-130 YJS-135
Hardness Shore A 30 ± 2 35 ± 2
Mix Ratio A:B 1:1/0:1 1:1/10:1
Color / Red/Yellow blue/translucent Red/yellow/ blue/translucent
Pot life 25 ° C (77F) 30-40mins 30-40mins
Curing time 25 ° C (77F) 3-4 hours 3-4 hours
Mixed viscosity mPa.s 7000 ± 1000 8000 ± 1000
Tear-strength kg/cm 24 ± 2 25 ± 2
Tensile-strength M.pa 5.0 ± 0.5 5.5 ± 0.5
Elongation % 450 ± 50 450 ± 50
Shrinkage % ≤ 0.1 ≤ 0.1

More from this supplier