Kevlar Edge Corrugator Belts Used for BHS, JC, TCY, CHAMPION Corrugated cardboard production line
- Product group
- Corrugator belts
- Yike Group
China Yike Group Co., Ltd.
BRAND: YIKE GROUP
Kevlar edge woven type Corrugator belts also named Corrugated board conveyor belt.
Kevlar edge Corrugator belts is for Top belt of corrugated board production line.
II: Corrugator Belt Seam
1: USA Fastener clipper With Rubber
2: Hot Jaw Lacing
III: Technical Specifications:
Type YKK-Kevlar edge
Width (1600- 28 00)mm
Heat-resistance 2 4 0℃ (Kevlar Edge part up to) 350℃
Tensile strength 75Mpa
Coefficient of friction ≥0.4u
Weight per unit (7.5 ± 0.3)kg/m 2
Air-permeability 2.2m 3 /m 2 min.
IV: Products Features
Tensile strength Warp direction (63-75) Mpa in dry mode
Heat resistance Raw materials are polyester synthetic fiber, softening point≥260ºC
Moisture absorption Quick absorption and emission of heat, therefore cardboard can be quickly dried
Seams Belt seam part is fabricated with imported steel fasteners and filled with rubber, flat surface, heat- resistance, fastness and non-marking
Suitability Suitable for BHS, JS, TCY, CHAMPION, YIKE GROUP, FOSBER corrugators, various cardboards and some particular operation mode.
Geometrical dimension Steady belt dimension, high weaving density, low stretching and contraction and good contact between belt surface and cardboard.
Service life As long as the same products imported abroad.
V: BELT PHOTOS SHOW
- Company name
- China Yike Group Co., Ltd.
- Business type
- Year established
- Number of employees
- Exports to