anticorrosion submersible pump
Suitable for offshore platform fire-fighting, thermal dissipation, seawater desalinization, seawater lifting, coastal square fountain, mariculture in coastal area and other corrosive feilds .
The biggest outer diameter of the set checking in parameter list.
Fixed bolt quantity:12, type: 16×608.8, bolt center distance:256mm.
One flange(outer diameter 282mm,inter diameter 220mm, thickness 20mm ) matching with outlet.
1 All kinds of seawater, alkaline corrosive water, clean water, cold water, rainwater, gushing water of mining, drinking water, etc.
2 Water temperature range: +5--+25
3 Solid content (mass ratio): ≤0.01%
4 PH value: 1-8.6
5 Full set should be submerged in water
The submersible motor is lubricated by clean water. It must be filled with clean water or its service life will be lessen. If you forget filling, the motor will be broken.
Motor protection level: IPX8
Voltage: 380v ,Frequency: 50HZ OR Voltage:660v, Frequency:50HZ
If you need special voltage or frequency, please inform us in advance.
Impeller: Common materials plus casting ceramic materials
Pump bowl: Common materials plus casting ceramic materials
Pump shaft: stainless steel 316L. Filter :316L. Bolt:316 Flange:316
End bell (upper and lower): 316 Middle part:316 Motor shaft:316
Motor Seal: Rubber O-ring seal, mechanical seal
Motor regulating sleeve: rubber.