ASA Synthetic Resin Residential Roofing Tile
Product name: Residential Roofing Tile
Meterial: skin layer: ASA; lining: Synthetic resin
Working width: 960mm
Wave number: 7
Wave height: 27mm
Wave width: 80mm
Pitch of wave: 160mm
Color: customer (perplish red, bluish grey, dark grey, light grey)
Excellent anti-load property:
It has a good bearing capacity.In low temperature areas, even if the roof perennial snow, it will not produce surface damage and fracture.It is tested that the loading of the 100kg tile at the support distance of 660mm does not produce cracks and damage.
Impact resistance and low temperature resistance:
Experiment proved that 1kg steel ball from the 3M high free fall will not produce cracks, low temperature impact resistance is also very significant.
Excellent corrosion resistance:
Long term protection against acid, alkali, salt and other chemical substances corrosion. The experiment proved that the salt, alkali and 60% kinds of acid soaked in the following 24 hours without chemical reaction. Very suitable for acid and alkali areas and coastal areas.
Excellent thermal insulation performance：performance The thermal conductivity is 0.325w/m.k, about 1/310 of clay tile, cement tile 1/5, 0.5mm thick color steel tile 1/200. Therefore, without considering the insulation layer, the thermal insulation performance is still the best.
Excellent self cleaning performance: The surface is smooth and compact "lotus effect". Itself is not easy to absorb dust, the rain washed clean as new, tile surface dirt washed by the rain will not appear mottled phenomenon.
Good Sound-proof insulation:
It has been proved by experiments that the synthetic resin tile has a good effect of absorbing noise when subjected to external noise such as rainstorm and gale.
Synthetic resin tile's surface material is the imported selection of super high weatherability resin.It has extraordinary durability in the natural environment, even if the long-term exposure to ultraviolet light, moisture, heat, cold conditions, it still can maintain its color stability.
ASA Synthetic Resin Roofing Tile Accessories
Long term protection against acid, alkali, salt and other chem...
TILTED RIDGE TILE
Synthetic resin tile's surface material is the imported select...
Tilted Ridge Tile
MAIN RIDGE TILE
Excellent self cleaning performance: The surface is smooth and...
Main Ridge Tile
END CAP OF MAIN RIDGE
It has been proved by experiments that the synthetic resin til...
End Cap Of Main Ridge
Snthetic resin tile installation precautions
1, purline optional square tube (square tube) (60 * 40 * 3mm) need to embalmed (embalmed). Horizontal bar (vertical with the tile length) spacing 700mm ~ 800mm, vertical sandalwood (parallel with tile length) spacing 2000mm ~ 2500mm. Insist to Tan column spacing ≤ 1500mm.
2, The main tile should be installed reversely according to the local wind direction. The two tiles should overlap one crest horizontally (including the overlap of the ridge tiles) and overlap with one pitch in the longitudinal direction. The overlap should be at the contact area of the purlin. Self-tapping screws.
3, in the case of two slope roof, two slope symmetrical to be installed in order to facilitate the installation of corrugated roof is consistent with the waveform. The company is located in:
4, the ridge roof tiles and ridge ridge lap joints (joint) should be processed smooth, so that the installation of three links. The company is located in:
5, Fixed with accessories For special dovetail nail, first place the sealing gasket and tighten the bolts with electric wrench, then cover the cover cap.