Fiberglass Duct Rod can be used for telecom cables, cable pipe and cleaning and plastic pipe of cloths to put.when use draws out the FPR pole by the pulley, then with a corresponding metal joint, penetrates in the pipeline. When cleaning, guide-head will drive cleaning tools to clean the pipe;When arranges the cable,you may first leads the steel wire or the iron wire, then enters the pipe with the steel wire or the iron wire hauling cable.It is an ideal tool for underground jobs such as pulling cables and lines through conduits, tubes, pipes or ducts. For its high tensile strength, wear-resistant surface and elastic body, it is widely used in the fields of telecommunication, electric power, water conservancy, etc.
Features and benefits of the rod:
Light weight, durable, resistance to acid, alkali, aging resistant, corrosion resistant.
High tensile strength and bending properties to make it go through narrow pipes easily.
Good temperatures adaptability, it will not soften in hot weather nor become brittle in cold weather, its usability will not be affected by temperature
Its outer protected layer is made of high density polyethylene engineering plastic, which has good anti-UV capability, the advantage of smooth, wear-resistant and long service life.
There are meter marks on the rod for the user easily read it. The marks is waterproof, ultraviolet and it can be still clear even after using many times.
There are several colours available at option.
Features and benefits of the reel/wheel:
The reel is equipped with brake device, the rotating or stopping of the rod can be easily realized just by turning hand,
It has the tilting type handle, convenient for pushing and pulling.
It has roller and ring on the top and bottom used for the convenience of duct rodder going through, protect the cover from being scratched.
Fiberglass reinforced composited core
Fiberglass content of inner part 75-80%
Material of the pulling rod Fiberglass(inner) high density polyethylene(outer)
density > 1.9g/cm3
Working temperature -40°C to + 80°C
Minimum pulling strength 4000 N±5%
Tensile modulus >46.50Mpa
Consistency of rod 137g/m
Flexural modulus >46.50Mpa
Elongation at break 2.5-3%
Min.bending radius 380mm
Tensile strength >15N/mm2
Environmental stress & crack resistance >1000 hr.
Heat stability ok
Carbon black ok
rod diameter(mm) 4.5,6,8,10,11,12,13,14,15,16,18
rod length (meter) 30-500
reel size (mm) 1300x450x1330, 1200x420x1220, 980x350x1000,