Bikudo

Spindle drive with Pneumatic Cylinder LH/RH 12V/24V for plug bus door (POM100)

Spindle drive with Pneumatic Cylinder LH/RH 12V/24V for plug bus door (POM100)
Supplier:
Manufacturer
NO.55 Hebin Road, Nanjing, Jiangsu, 211800, China
Origin:China
Category:Bus Body Kits

Description

Application: tour bus and intercity bus.

System Component: Rotary actuator.

1) The actuator provides rotary motion and "Lift-to-latch" feature.

A double acting cylinder drives a splined shaft through a helical ball cage to provide rotary motion. When the door reaches the closed position, the actuator lifts the door shaft and door panel approximately 10mm,enabling latches on the door panel to engage mating wedges on the door jambs.The door panel is held closed as long as air pressure is applied the actuator.

Operating principle:

1)Auto operation :When "open" or "close" switch is pushed, the 5-way 2-position solenoid valve will be actuated, which drives linear pneumatic cylinder move up and down. Through splined shaft,the linear motion transfer to rotation, which cause the door open or close.

2)Emergency release: In case of emergency, rotate the emergency valve 90 degree to release the air pressure. The door panel will drop as soon as air pressure in the cylinder is low. Push the door panel manually to open the door

3)Sensitive edge: In case the passenger or other items are clamped during the vehicle door closing, the door panel will be lifted and actuate the limit switch to reverse the motion to open the door.

Main Parameter:

Maximum torque in locked position (@90 psi) 122 ft-lbs

Recommended door shaft rotation 90 degree

Operating temperature -30°C to 80°C

Envelope size 5.51"w x 12.50"d x 4.53"h

Operating pressure 90-125 psi

Minimum Life cycle 500,000

Locking mechanism Local wedge lock

Door closing time 3-5 seconds

Door opening time 3-5 seconds
© 2005-2020 Bikudo Privacy PolicyTerms of Service