ZYD transformer oil filtration process serves to improve the properties of insulating oil. It eliminates the acid nature, over moisture, traces of water, dissolved gases, and particulate matter from the insulating oil effectively and rapidly. The bottom line of this purification process is to enhance the performance level of transformers, circuit breakers, mutual inductors, cables, and capacitors. All these equipment and machinery use an insulating system.
In a single pass through the purifier at a full flow rate:
Water Removal: From 50 ppm down to less than 5 ppm in a single pass & down to 3 ppm after two passes. (According to the PPM Tester)
Gas Removal: From fully saturated with air (10% to 12% by volume) down to less than 0.1% by volume.
Particulate Matter Removal: 98% of particles over 0.5mm or over 1 mm or over 5mm at customers preference.
Dielectric Strength: Improve dielectric strength up to 75-80KV for New oil.
Acid Removal: after treatment, the acid value will down to less than 0.1mgKOH/g
Free Carbon Removal: there is no free carbon’s residue
Please contact ASSEN for a quote, we will give you a reply ASAP;