IS,IH Single stage back pull-out end suction centrifugal pump
Horizontal single stage end suction back pull out Centrifugal Pump
IS & IH Type Centrifugal Pump is a horizontal single-stage single suction (axial suction) cantilever centrifugal pump. IS pump is suitable for pumping water and other liquid similar to the water below 80 degree Celsius and liquid is without solid particles. IH Pump is suitable to convey corrosive liquids at the temperature of -20 to 120 degree Celsius and the liquid has similar viscosity to water and does not contain solid particles. If the liquid is with solid grain, please inform us to adopt open impeller.
IS Series centrifugal pump is made of cast iron material and IH Series centrifugal pump is made of stainless steel material.
Performance : (50HZ or 60HZ)
Flow is up to 1200m3/h
Head is up to 180m
Temperature up to 120Deg C
Diameter :up to 400mm
Pressure up to 25bar
Horizontal End Suction Centrifugal Pump Construction:
Design Standard: GB , DIN24255
Flange Standard: GB , DIN2501 , ISO7005.2
Impeller Type: Closed, Semi-open, Open, Vortex
Seal Type: Mechanical Seal or Gland Packing
1. Its performance and dimensions meet European Standard BS EN733/DIN24255
2. Back-pull-out design, it need not to disassemble pump body and pipelines when check and maintain the pump.
3. All the models only use 3 kinds of pump shafts and bearing cover to make parts exchangeable.
4. Impeller is optimized designed, inlet is enlarged, no whirlpool, deduct the water pump NPSH efficiently, which makes pump work stable with little noise.
5. Casing and casing cover use wearing neck ring structure, which makes pump easy to maintain, makes parts work longer. The replaceable seal ring, makes pump work efficiently in a long time
Pump Construction :
1. Non-self-priming, single stage, single suction, horizontal, axial suction and radical discharge, pump body is fixed by base.
2. Use bearing cradle, which can orientate bearing, prevent from radical vibration, improve the rigidity of rotary part.
3. Compacted shaft, use deep grove grease lubricated roller bearing
4. Connect pump and motor with semi-flexible coupling
5. Use standard wearable mechanical seal.
6. TEFC motor, its size complies to IEC standard, installation type B3.
IS & IH Centrifugal pump can be used for the following services in the Commercial, Residential, Agricultural, Industrial, Process, Petroleum and Food & Beverage industries:
Air Conditioning, Refrigeration, Fire Protection,Plumbing,Circulating,Transfer,Irrigation,Drainage,Pressure Boosting, Cooling Towers, Water Treatment & Supply etc.
About the company
- Primary products
- Self Priming Pumps & Centrifugal Pumps
- Year established
- Business type
- Number of employees
- Bikudo member since
- Nov 2009
Company produces the pumps such as self priming pump, pipeline pump, submersible pump, chemical pump, oil pump, magnet pump and diaphragm pump and multistage centrifugal pump etc. Company also enlarge the production and research and development of valves such as gate valve, ball valve, check valve etc. The products are widely used in machine, petroleum, chemical industry, metallurgy, pharmacy, environment protection, electric power, natural gas and water supply and discharge in city etc and get good comments.