08BY25 8mm Micro Stepper Motor, 18° Step Angle, 3V–5V DC
Description
KS-08BY25 Series 8mm Micro Stepper Motor
The KS-08BY25 series is a miniature two-phase permanent magnet stepper motor manufactured by Keshuo Motor. With a nominal 8 mm motor diameter and an 18° step angle, the series is intended for compact mechanisms requiring controlled incremental rotation.
Different winding configurations are available for 3 V, 3.3 V, 3.7 V and 5 V DC applications. Motor current, holding torque and electrical characteristics vary according to the selected model.
Main Specifications
Motor Model: KS-08BY25 Series
Manufacturer: Keshuo Motor
Motor Type: Permanent Magnet Stepper Motor
Number of Phases: 2
Step Angle: 18° per step
Excitation Method: 2-2 Phase Excitation
Drive Configuration: Bipolar
Nominal Motor Diameter: 8 mm
Voltage Options: 3 V, 3.3 V, 3.7 V and 5 V DC
Optional Customization: Motor windings, shaft dimensions, lead wires and selected lead screw configurations
Electrical and Torque Specifications
08BY2510-N – 3.7 V Version
Rated Voltage: 3.7 V DC
Coil Resistance: 10 Ω ±10% per phase
Listed Phase Current: 300 mA
Holding Torque: 10 g·cm
Detent Torque: 5 g·cm
Motor Body Dimensions: Ø8 × 10.7 mm
08BY2520-N – 3.3 V Version
Rated Voltage: 3.3 V DC
Coil Resistance: 20 Ω ±10% per phase
Listed Phase Current: 120 mA
Holding Torque: 8 g·cm
08BY2540-N – 3.0 V Version
Rated Voltage: 3.0 V DC
Coil Resistance: 40 Ω ±10% per phase
Listed Phase Current: 62.5 mA
Holding Torque: 7 g·cm
These are the supplied model reference values. The appropriate phase current and driving conditions should be confirmed for the selected winding and motor driver.
5 V Stepper Motor Configuration
A separate 5 V winding configuration is also available, with the following reference specifications:
Rated Voltage: 5.0 ±0.2 V DC
Coil Resistance: 20 Ω ±10% at 25°C
Coil Inductance: 3.0 mH (reference)
Number of Phases: 2
Step Angle: 18°
Excitation Method: 2-2 Phase Excitation
Drive Mode: Bipolar
Maximum Pull-Out Rate: Greater than 2,600 PPS
Maximum Pull-In Rate: Greater than 1,000 PPS
Coil Insulation Class: Class E
Dielectric Strength: 100 V AC for 1 second
Insulation Resistance: At least 50 MΩ at 500 V DC
Operating Temperature: 0°C to +55°C
Pull-in and pull-out rates depend on the driving method and mechanical load. Test conditions and performance requirements should be reviewed before selecting the 5 V configuration.
Mechanical Configuration
The 08BY25 series uses a compact cylindrical motor housing for installation in miniature electromechanical assemblies.
Depending on the model and OEM requirements, available modifications may include output shaft length, shaft configuration, wiring connections and selected lead screw arrangements.
Motor body dimensions, shaft extension and mounting details should be checked against the dimensional drawing for the specific version.
Applications
The KS-08BY25 series can be evaluated for:
Compact Positioning Mechanisms: Small adjustments requiring incremental rotary motion.
Optical Instruments: Miniature adjustment mechanisms with suitable mechanical transmission.
Laboratory Equipment: Low-load positioning assemblies and compact instrument mechanisms.
Portable Electronics: Small motorized components where installation space is limited.
Miniature Automation: Light-load mechanical adjustments and controlled rotary movements.
Application suitability depends on available torque, driving current, operating temperature, positioning requirements and mechanical load.
OEM Customization and Sample Orders
Keshuo Motor supports customized micro stepper motor configurations for equipment manufacturers.
Customization options may include winding resistance, rated voltage, output shaft dimensions, lead wires, connectors and selected mechanical configurations.
Custom Sample Lead Time: 10–20 business days.
Bulk order quotations are available based on the selected configuration and estimated order quantity.
For motor selection or custom sample requests, please provide the required voltage, operating current, load torque, dimensions, shaft arrangement and application conditions.
All listed specifications are reference values and should be confirmed against the selected model's technical drawing and test data before production.