12mm N20 Micro Gear Motor with 3PPR Encoder and 9mm Spur Gearbox
Description
KC-GM12-N20-10138 Series – 12mm Micro Gear Motor with Encoder
The KC-GM12-N20 gear motor is a compact 12 mm N20 micro gear motor featuring a 9 mm miniature spur gearbox and a 3 PPR magnetic encoder. It is developed for equipment requiring reduced output speed, controlled torque transmission and rotational feedback within a limited installation space.
The 3.7 V DC micro motor base configuration operates at 15,000 rpm without load. With a 30:1 spur gearbox, the output speed is reduced to 500 rpm without load, with a rated output speed of 410 rpm and rated torque of 0.04 kg·cm.
Technical Specifications
Parameter
Specification
Product Series
KC-GM12-N20-10138
Motor Type
DC Micro Gear Motor
Motor Diameter
12 mm
Rated Voltage
3.7 V DC
Base Motor No-load Speed
15,000 rpm
Gearbox Type
Spur Gearbox
Gearbox Length
9 mm
Gear Ratios
30:1–380:1
No-load Output Speed
500 rpm (30:1)
Rated Output Speed
410 rpm (30:1)
Rated Torque
0.04 kg·cm (30:1)
Encoder Resolution
3 PPR
Shaft Diameter
3 mm
Mounting Interface
M1.6 × P0.35
Quality System
ISO 9001
Compliance
CE
Gear Reduction Options
The KC-GM12-N20 series provides multiple reduction ratios for different output speed and torque requirements.
For the 3.7 V KC-GM12-N20-10138 configuration:
Gear Ratio
No-load Speed
Rated Speed
Rated Torque
Stall Torque
30:1
500 rpm
410 rpm
0.04 kg·cm
0.23 kg·cm
50:1
300 rpm
246 rpm
0.06 kg·cm
0.33 kg·cm
100:1
150 rpm
123 rpm
0.12 kg·cm
0.67 kg·cm
150:1
100 rpm
82 rpm
0.15 kg·cm
0.83 kg·cm
210:1
71 rpm
59 rpm
0.21 kg·cm
1.17 kg·cm
250:1
60 rpm
49 rpm
0.25 kg·cm
1.39 kg·cm
298:1
50 rpm
41 rpm
0.30 kg·cm
1.66 kg·cm
330:1
45 rpm
37 rpm
0.33 kg·cm
1.83 kg·cm
380:1
39 rpm
32 rpm
0.38 kg·cm
2.11 kg·cm
A separate 6.0 V DC gear motor configuration, KC-GM12-N20-05Z390, is also available in the series. Its output speed ranges from 263 rpm to 21 rpm across the listed reduction ratios.
Encoder Feedback and Mechanical Integration
The 3 PPR magnetic encoder provides rotational feedback for applications requiring motor speed monitoring and position-related control.
The miniature spur gearbox motor uses a compact mounting interface. The referenced mechanical drawing shows M1.6 × P0.35 mounting holes and a 3 mm output shaft.
The 9 mm dimension refers to the gearbox length rather than the complete motor assembly length. The full installation dimensions should be checked against the mechanical drawing before integration.
Applications
The N20 motor platform can be evaluated for compact mechanisms in:
Smart electronic door locks and automated latching systems
Medical infusion pump mechanisms
Optical pan-tilt camera heads
Small robotic joints and positioning mechanisms
Automated valve actuators
Laboratory pipette dispensing equipment
Analytical testing instruments
Financial self-service kiosks
Application suitability depends on the required output speed, torque, encoder feedback, operating cycle and mechanical installation conditions.
OEM and Customization
Kechen Motor supports OEM/ODM development for micro gear motors with different electrical and mechanical configurations.
For project evaluation, please provide the required operating voltage, output speed, torque, gear ratio, shaft dimensions, encoder signal requirements, installation space and estimated order quantity.
Sample development and production arrangements can be discussed according to the project specifications.